Zone A/C Difference in Temp?

[CornersWell]

Indy obtained one (new) from their parts supplier. ~$200. Indy stated that one of the others I needed was NLA through their part suppliers. The other, new, was almost $500, IIRC.

So, I obtained the other two on eBay. One was new ($85), the other used ($20). ~$105 total.

Indy's diagnostic scan showed 3 of 4 servos throwing codes. Those 3 have now been replaced. 90+ degree temps outside currently. 100+ heat index. Blowing ice cold on both sides. Even after shut down, sitting and re-start. Problem seems to be fixed.

CW

[rah]

Indy obtained one (new) from their parts supplier. ~$200. Indy stated that one of the others I needed was NLA through their part suppliers. The other, new, was almost $500, IIRC.

So, I obtained the other two on eBay. One was new ($85), the other used ($20). ~$105 total.

Indy's diagnostic scan showed 3 of 4 servos throwing codes. Those 3 have now been replaced. 90+ degree temps outside currently. 100+ heat index. Blowing ice cold on both sides. Even after shut down, sitting and re-start. Problem seems to be fixed.

CW

Good to know, this gives me a little hope and a solution for replacement of the 2 needed that are throwing codes in mine. I will go through E bay and follow the link you provided. I found the two needed that i can see, Bosh made and around $25 a piece. Hopefully they will fit (showing C5 A6/Allroad/S6 and RS6 compability) and the problem will be solved. Thanks again!