Glad to hear you're on the home stretch. Just some advice for when you bleed the clutch, make sure the rear end is about 1-2 ft above the front. The 01e slave cylinder will never properly bleed if it's not.

Also with that, there should be plenty of room to get your hand in from the top if you deleted the SAI and disconnect the breather hose that comes off the driverside turbo inlet. Takes about 5 minutes to fully bleed by yourself and a 3' 2x4 for the clutch pedal. Can't wait to see it on the road!

20190608_231330 by Joel Francisco