Quote Originally Posted by Muggy View Post
There are a few sets out there with heim joints...some on just the outer link and some on both ends...

Here's a set that I picked up from 034 to put on with the 2Bennett coil overs that I picked up from Chase on here a while back...these are supposed to be rebuildable as well with the higher durometer rubber in the one end and the heim joints (full rebuild kit from 034 for both ends).

https://store.034motorsport.com/034m...a6-s6-rs6.html





And here's their version with a double heim joint...

https://store.034motorsport.com/034m...-b5-b6-b7.html

And a spare set that I have that I got with the coilovers, but decided to go with the 034's (let me know if you may be interested in these for a deal!)...

https://steinjager.com/shop/index.ph...oduct_id=29433
Quote Originally Posted by hahnmgh63 View Post
I have a set of the older 034 version. I only used them on my car for less than 1k. The lower arms were so free to rotate compared to the OEM rubber that they would teeter back and forth upon acceleration/deceleration and making a knocking sound like a worn out pair of arms do. I'd be curious if the newer version still does the same. The ones I have are just Spherical joints installed in a set of Meyle HD arms, the new ones look like a completely new arm design.
Thanks everyone for the input, Muggy are you offering for sale these: https://steinjager.com/shop/index.ph...oduct_id=29433 ? Hahnmgh63 how/where did you obtain the Spherical joints? I think my car has Meyle front upper and lower arms. I do have the Koni yellow's ready to go at the shop and was thinking to pair those with the OEM springs as I don't want to lower & sold my H&R springs that came with the car. Thanks again for the guidance also if anyone can suggest the correct settings for the Koni setup if the DRC get's ditched thanks!