So here's a screenshot. I've got a current SAI leak that pops up and I clear the CEL. From my reading, this reset/clearing faults is causing some of these to show as failed until I drive X amount of miles. Also, I get this failed communication box after 5-10 seconds. Looks like NY state is lenient on some things, even giving a one year exemption if needed. I'll check with the shop about fixing the SAI if they can get to it, or maybe just looping the line to trick the computer as commonly discussed, the last shop left something loose but it all works otherwise. Thoughts on this before I visit the shop? Thanks! No other codes when scanning besides my SAI leak caused by some previous repairs.
Reply With Quote