So I clarified my 'leak' and it's the CV joint boot which is torn. I had one replaced on the other side a year or so ago for $248.

I ordered the parts (kit from ECS for $18.00 plus shipping. I found a nice write up on Audizine for a 2002 A6.

I looked at the Ebahn manual and the description involves a special tool to press the DV joint off the drive axle. The Writeup on Audizine says you can drive the bolt back into the end of the drive shaft and it will press the CV joint off the end of the drive axle thus the "special tool" is not needed.


Can anyone confirm this for the RS6???

Thanks.

Mike