FOR SALE (finally): 6 Speed 01E Adapter Kit for the C5 RS6

[SteveKen]

FOR SALE:

This kit adapts the 01E transmission to the RS6 block and crankshaft.

For $2,100 USD, the kit includes:

Transmission adapter plate
Racing starter with custom nose (uses stock wiring harness)
Aluminum flywheel
Hardware kit
Detailed installation instructions



This kit was professionally developed by an experienced engineering firm via 3D laser scanning and CMM technologies to ensure accuracy, safety and rigidity. The adapter and starter nose are CNC machined from 6061 aluminum.

The kit must be used in conjunction with the following OEM or aftermarket pieces (not included) for a complete mechanical conversion from an automatic to manual:

From the C5 A6 2.7T or C5 S6 manual transmission models, the drive shaft, front axles, transmission brackets, clutch pedal and all associated mechanical components, slave cylinder and all associated hydraulic components, reverse switch and VR sensor can be used

The transmission mounts and three (3) M12 transmission to engine mounting bolts are retained from the C5 RS6

The flywheel is designed with the appropriate dimensions to mate with the 01E and use the C5 2.7T or C5 S6 clutch and pressure plate and throwout bearing. So you would need to source a clutch and pressure plate to your liking based off of these OEM modes for reference for reference.

There are many different variations of the 01E than can be selected for use. The final drive of the front differential will dictate which rear differential is required.

Please note, and it's been stated before: This kit only facilitates the mechanical mating of the RS6 motor to the 01E. On my end, the ECU modifications are not available, but hopefully will be in due time.

Quantities of the CNC components are currently underway and my lead times for flywheels and starters are approximately 2 - 3 weeks.

Shipping will be quoted separately for each inquiry and delivery can be made to anywhere on the globe where the RS6 exists.

Pricing for a steel flywheel option will be available very soon, too.

Please feel free to PM me or post with any questions.


Disclaimer: This for sale post has been graciously permitted by RS6.com and it's admins, etc.