Quote Originally Posted by nene View Post
This appears to be a new harness that is being provided that is more general in nature. You don't have to connect the extra one. If you noticed the original harness that I purchased only had 3 connectors. You should have enough room behind the radio to stash it. I would recommend at least using some felt around the extra unplugged connector as well as a zip tie to keep it all tidy. This way when you go over bumps and such you won't hear anything loose back there, which will drive you crazy.
Thanks for the reassurance, I’ll give it a shot, and will definitely wrap the unused connector as you described. I was expecting three connectors! When you wrapped your wiring with zip ties, did you just use a thin packing wrap (like 1/8” thick)? I removed and replaced everything from the cup holder up top down to the ash tray in that area, so I’ve definitely seen there’s plenty of room (as your instructions indicated, too). I have the instrument cluster out for a center LCD replacement, so as soon as it’s back I’ll get the head unit installed.