Quote Originally Posted by 4.2Crew View Post
Yes, I took measurements from the axle center to the top lip of the wheel wells on all 4 corners 10 minutes prior to tearing into it...
So when done, the setting was how close to stock ride height? I would imagine if a spring compression measurement was taken before removing the springs from the DRC, and then matching that to whichever groove on the Koni yielded the same measurement, and then provided that the perch to bottom mount centerline measurement is the same (Koni probably copies it), then it should be close to stock ride height. Was that the case for the front?

Please give a 1000 mile report. It will also be interesting to see if you feel the need to upgrade the swaybars, since DRC is supposed to be an "active swaybar" there when you need it, and not affecting ride quality when you don't.

Lastly, again, that lift is killer!

Thanks for the report!