Results 1 to 4 of 4

Thread: LED conversion for HID ?

  1. #1
    Registered User
    Join Date
    Mar 2017
    Location
    White Rock, B. C., Canada
    Posts
    56

    LED conversion for HID ?

    Just eondering if anybody has found a solution.
    The H7 bulbs fro Low Beam and the fog lights if ound to be available
    as a kit. My car is a Canadian model (Fog lights are also DRL).
    Any tips appreciated
    Happy New Year
    Ivan

  2. #2
    Registered User
    Join Date
    Mar 2017
    Location
    White Rock, B. C., Canada
    Posts
    56
    So far found foglight LED: Philips #11086UE2x2 (which is DRL also for Canadian models)
    For high Beam Philips # 11972ULX2
    Ordered the Fogs, will see how they do.
    CAN BUS Package H7 required for each set.
    Ivan

  3. #3
    Registered User
    Join Date
    Mar 2017
    Location
    White Rock, B. C., Canada
    Posts
    56
    Got around to adress instzllation of foglight LED's.
    Bulb fits, but thefactory Audi rubber connector would have to be modified, and would not give
    a permanent seal thereafter. For now a no.
    Installed the Hotchkiss Swaybars though, and eliminated the Headlight level sensor fault
    symbol off the dash. The connection between the front levels sensor and the Rod was
    missing the Nut. Should get better lighting now to.
    The remaining possibility are the H7 replacements in LED for the High Beam.
    For the Fogs stronger H7 Bulbs are available as an alternative.
    Cheers,
    Ivan

  4. #4
    Registered User
    Join Date
    Mar 2017
    Location
    White Rock, B. C., Canada
    Posts
    56
    Just an update. Tied to install Philips conversion also into my 1994 Taurus SHo, also no joy.
    Correct form factor but Unit does not fit (too long).
    MB T2/609d truck, H4 similar problem as the Audi, as the rubber seal would have to be modified, also a spring loaded system to retain bulb
    interferes with fit of the LED.
    For the Audi fogs the best way I can see would be to find a complete Fog light fitting into same spot as the original lights.
    HID to LED in the projectors I am not going there due to my current experience suggesting issues (also needs bumper removal).
    The H4 to LED kit for my Austin Healey fits though.
    Any body else tried it for our RS6's ?
    Cheers,
    Ivan

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •