Results 1 to 2 of 2

Thread: 4.2T BCY Engine Partout

  1. #1
    Registered User
    Join Date
    Apr 2019
    Posts
    154

    4.2T BCY Engine Partout

    Parting out the BCY 4.2 out of the RS6 powered C4 S6 I have. Engine had 105,xxx miles when installed. Let go at 112,xxx.

    Intake manifold with fuel rail (Fuel rail and injectors are from another part-out RS6 I had. It's not the same one that cause the detonation on cylinder 8) I can include the factory Y-pipe as well.
    20201109_170324 by Joel Francisco
    20201109_170330 by Joel Francisco
    20201109_170344 by Joel Francisco

    Oil Cooler assembly. I have the 8mm allen bolts for mounting as well. External oil filter sandwich plate was rotated 180 degrees to clear my subframe. Forgot to rotate it back pre picture.
    20201109_170421 by Joel Francisco
    20201109_170426 by Joel Francisco
    20201109_170442 by Joel Francisco

    Lower and upper oil pan. Uncracked. Had a block off plate on one drain to allow for single turbo. Easily removable. Oil level sensor included.
    20201109_170658 by Joel Francisco
    20201109_170634 by Joel Francisco
    20201109_170718 by Joel Francisco

    Serpentine belt pulley and housing. Located in front of the thermostat housing. Thermostat housing included as well.
    20201109_170554 by Joel Francisco

    Oil pump with screen.
    20201109_170749 by Joel Francisco

    Driver side head. May part out; prefer to ship as a whole. Cylinder 8 had detonation. No bent valves though. Cams are still tightened down
    20201109_170945 by Joel Francisco
    20201109_170828 by Joel Francisco
    20201109_170902 by Joel Francisco

    Passenger side head. May part out; prefer to ship as whole. No bent valves. Cams are still tightened down
    20201109_171138 by Joel Francisco, on Flickr
    20201109_171039 by Joel Francisco
    20201109_171108 by Joel Francisco

    Engine block. Cylinder has pitting. May be able to bore out. I'm making a table out of it if it's no use to anybody.
    20201109_171358 by Joel Francisco
    20201109_171405 by Joel Francisco

    Engine timing covers. Uncracked; sexy.
    20201109_171320 by Joel Francisco

    Harness and ECU. Stock tune. Wiring sheath next to secondary firewall was removed to get a count on what kind of QD cannon plug I needed to run. Some broken connectors. The section needed for crank position sensor, oil level sensor, and driverside engine mount was cut from P.O. I have the cut section as well
    20200521_175745 by Joel Francisco

  2. #2
    Registered User
    Join Date
    Apr 2019
    Posts
    154
    Update...

    The throttle body, oil filter sandwich plate, oil pump, and serpentine belt pulley bearing are sold.

    Engine block will stay with me to make a table.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •