Quote Originally Posted by kruat View Post
Looking good!

Good info on the wheel bearing/axles. I wouldn't of thought it would cause damage.
Thanks!
Agreed on the wheel bearings...jacked up the car, re-installed the axles and put some torque on them...have it sitting on wheel dollies on the front now so the axles don't flop around when moving in the garage...also helps because I can push it side to side now as well, giving me a critical few inches here and there in my limited space!

Fingers crossed that I won't have any bearing damage...I had weight on them with the motor in and rolled about 5 feet, pulled the motor and rolled again another 5 feet. At least I can replace them if needed without an engine pull!