Results 1 to 11 of 11

Thread: 2003 RS6 Partout

  1. #1
    Registered User
    Join Date
    Apr 2019
    Posts
    154

    2003 RS6 Partout

    Good day peoples. I picked up a RS6 for the block/heads/ecu and some interior wiring. Front bumper and fenders were gone when I bought it, but the rest is for sale. Shell is available for $1500 with wheels and tires.


    Wheels have curb rash, new 235/40/18's in the front, 255/40/18's in the rear: $500
    Bilstein Coilovers, a little crusty, but otherwise good: $300
    Inner fender covers: $100
    Radiator Support w/ fans: $200
    A/C Condenser: $100
    40v BCY Exhaust manifolds: $100
    40v NA Echaust manifolds: $100
    RS6 Y-Pipe Throttle body inlet: $150
    2x Good condition driveshafts: $100 each
    BCY Engine Harness: $500
    BCY Stock ECU: $400
    Rear Trunk: $250
    Rear Bumper: $350


    Ask about anything and everything on the car, I'd even cut the rear up for somebody to use on a rear ended RS6... I also have a C5 A6 2.7T 6sp I'll pull apart next week, full 6sp conversion minus 01e will be available for that...


    20191110_114735 by Joel Francisco
    20191110_151932 by Joel Francisco
    20191110_151945 by Joel Francisco
    20191110_154010 by Joel Francisco
    20191110_152153 by Joel Francisco
    20191110_153957 by Joel Francisco
    20191110_153952 by Joel Francisco
    20191110_154000 by Joel Francisco
    20191110_154032 by Joel Francisco
    20191110_153927 by Joel Francisco
    20191110_152039 by Joel Francisco

  2. #2
    Registered User
    Join Date
    Oct 2019
    Location
    KC
    Posts
    28
    pm sent thanks

  3. #3
    Registered User
    Join Date
    Apr 2019
    Posts
    154
    Car is being sent to the scrapyard tomorrow as so my driveway doesn't look like said scrapyard. Everything I have listed is what I have pulled and is for sale. Items with * WILL NOT BE SHIPPED unless it is handled on your end.


    *Wheels have curb rash, new 235/40/18's in the front, 255/40/18's in the rear: $500
    BCY Engine Harness: $500
    BCY Stock ECU: $400
    *Rear Trunk: $150
    *Rear Bumper: $250
    Tail lights: $100
    *Dash/Center Console: $100
    *Full Undamaged Alcantara Headliner w/ all trim pieces (Headliner starting to sag but otherwise great condition): $350
    *Full Un-cut carpet (Great condition with minor blemish on driverside foot well): $300
    *Font subframe w/out coils: $200
    *Rear subframe w/out coils (Rear differential and axles included): $300
    40v BCY Exhaust manifolds: $50
    40v NA Exhaust manifolds: $80
    RS6 Y-Pipe Throttle body inlet: $100
    A/C Condenser: $75
    *Trans (Not sure Condition): Come get er'


    20191113_135332 by Joel Francisco
    20191113_125845 by Joel Francisco
    20191113_125845 by Joel Francisco
    20191113_140345 by Joel Francisco
    20191113_140329 by Joel Francisco
    20191113_140602 by Joel Francisco
    20191113_083602 by Joel Francisco
    20191113_083611 by Joel Francisco
    20191113_084014 by Joel Francisco
    20191111_163809 by Joel Francisco
    20191111_163821 by Joel Francisco
    20191110_151945 by Joel Francisco
    20191110_151932 by Joel Francisco
    20191110_154010 by Joel Francisco
    20191110_154032 by Joel Francisco

  4. #4
    Registered User
    Join Date
    Sep 2019
    Location
    Woodbridge Va
    Posts
    30
    I’ll take those intake air ducts to 22191 lmk are there any cracks

  5. #5
    Registered User
    Join Date
    Apr 2019
    Posts
    154
    Sold em sorry

  6. #6
    Registered User no.radar's Avatar
    Join Date
    May 2005
    Location
    Southwest Michigan
    Posts
    13
    Any chance you have the interior door pull (and surrounding trim) still available?

    If so, let me know cost.

    Many thanks.
    no.radar
    Town Drunk in Two Towns



  7. #7
    Registered User nistah's Avatar
    Join Date
    Nov 2010
    Posts
    566
    You've got PM!
    Current: Black Pearl Metallic Effect/Ebony, RNS-E, Euro + pedals, oCarbon, Hotchkiss Front & Rear Sway Bars, Koni Yellow's

  8. #8
    Registered User
    Join Date
    Jun 2018
    Location
    Orlando, Fl
    Posts
    112
    It's not listed, so it probably got scrapped, but I'm looking for a new ski boot assembly, in black.
    My door latches on the interior side are busted so the mofo won't stay closed.
    Thanks!

  9. #9
    Registered User
    Join Date
    Feb 2012
    Location
    Ottawa Ont Canada
    Posts
    53
    Oil cooler lines?

  10. #10
    Registered User kruat's Avatar
    Join Date
    Mar 2014
    Location
    Longview, WA
    Posts
    393
    Man I'd be interested in those coilovers, but they look rough. Any idea on mileage on them?
    -Mike-
    03 RS6 Mugello/Ivory #905565
    01 S4 Casa/sport/6spd

  11. #11
    Registered User
    Join Date
    Apr 2019
    Posts
    154
    Sorry guys for the delay.

    I only have the engine left...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •