Results 1 to 3 of 3

Thread: Clunking noise

  1. #1
    Registered User nistah's Avatar
    Join Date
    Nov 2010
    Posts
    566

    Clunking noise

    Tranny output flange and seal

    After replacing my front control arms and one axel boot I still have a slight clunking noise when going into reverse and/or when wheel turning radius is fully extended. My mechanic has diagnosed it as the tranny output flange and seal.

    There was a thread on here however now is only viewable via archive: http://www.rs6.com/archive/index.php/t-25719.html


    Mechanic took apart my existing output flange and seal and cleaned it up and put it back together which improved the issue but did not resolve. We could not find correct part #'s at the time and Audi Dealer was of no assistance. Mechanic suggests getting it replaced which he could attempt or I can bring to a trans specialist.

    I'm trying to determine if this part which is described as a upgrade forA8 as seen on http://forums.quattroworld.com/a8/msgs/32544.phtml is the correct part for the RS6.

    If the link is not the correct part to fit the RS6 does anyone have the correct OEM P/N's and/or suitable aftermarket upgrade parts info to fix this issue?
    T
    hanks
    Current: Black Pearl Metallic Effect/Ebony, RNS-E, Euro + pedals, oCarbon, Hotchkiss Front & Rear Sway Bars, Koni Yellow's

  2. #2
    Registered User nistah's Avatar
    Join Date
    Nov 2010
    Posts
    566
    Think this can be filed under asked and answered: I just spoke with John from Ericksson Industries (ZF distributor)1-800-388-4418

    he was very helpful confirming that the RS6 5HTP uses the same output shaft shaft flange parts as the A8.

    http://forums.quattroworld.com/a8/msgs/89047.phtml


    "The output flange ZF part number is 1058-336-122 $123.56
    The Plate with the seal ZF part number is 1060-236-063 $58.40
    Filter (3/4" pipe) ZF part number is 0501-006-460 $38.01
    Gasket Pan ZF part number is 1058-303-015 $20.76

    Audi Stealers want more than double for these things.

    Additional info that I figured after i took everything. I had to get the following parts:

    Make sure that you also order:
    1. the square shaped O-ring for the cover/plate with seal.
    2. My ATF Filter did not come with its O-ring.
    3. the ATF fill and drain plugs with their seals."

    Hope this helps others troubleshoot this issue


    Current: Black Pearl Metallic Effect/Ebony, RNS-E, Euro + pedals, oCarbon, Hotchkiss Front & Rear Sway Bars, Koni Yellow's

  3. #3
    Registered User AndyRS6's Avatar
    Join Date
    Apr 2016
    Location
    Chicago area
    Posts
    139
    Click image for larger version. 

Name:	8e10612s-960.jpg 
Views:	72 
Size:	55.0 KB 
ID:	17766Click image for larger version. 

Name:	bf6b3dcs-960.jpg 
Views:	79 
Size:	62.6 KB 
ID:	17767
    I would also recommend to change transmission electrical connector O-ring ( you need two ) part# 01V927322A



    Andriy

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •