Yes. P1054 is who initially pulled this together. See parts list below:
P1054
January 11th, 2015, 20:52
Sure thing!
Parts I used:
Spin-on adapter
Canton Racing Products 22-595
$ 82.92
Amazon.com
Oil filter housing
BMW E39 oil filter housing
$ 60.00
Gresham Auto Wrecking
Hose and fittings
Russell - 2x RUS-660503, 4x RUS-610045, 1x RUS-63216, 2x RUS-660883
$ 155.81
Baxter Auto Parts
Custom plugs for filter housing
Custom machined by me
$ -
Me
Filter
Mann HU-938/4-X
$ 10.79
Tony's Auto Parts03 RS6 Daytona Grey - EFI Express - 01e - SRM K24 - Aquamist - 495whp/580ft-lbs
May 19th, 2016, 18:29 #20How large is the E39 filter compared to stock? I've never really liked the relatively small oil filter on these cars considering the performance level of the engine.
May 19th, 2016, 19:26 #21I'd say the e39 filter is close to twice the size. It's just a very convenient design.03 RS6 Daytona Grey - EFI Express - 01e - SRM K24 - Aquamist - 495whp/580ft-lbs
May 19th, 2016, 20:32 #22Registered User
- Join Date
- Apr 2013
- Location
- Battle Ground, WA
- Posts
- 334
Yes, it's definitely substantially larger. Not to mention much more convenient to change. And to top it off, the filters are less expensive! All around a win-win.RS6 #1, 01E, 2.5" straight pipes, AMD Stage 1 6MT tune, 460awhp/530awtq on AMD's Mustang dyno. TOTALLED.. RS6 #2, Ebony Black Pearl on black/silver combination with carbon, up and running with 6 gears and AMD tune.
May 22nd, 2016, 05:34 #23Registered User
- Join Date
- Nov 2011
- Location
- Ohio
- Posts
- 441
On the injectors, it seems they're only good for like 600hp is what I'm seeing online?
This is saying they're not really 550's
https://www.facebook.com/Performance...type=1&theaterBB GT28's w/ Tial Wastegates, Full 3" Open Exhaust, Wagners, Billet Triple Disk Converter, Built Trans, Exedy Friction Disks, ECU/TCU Tuned, 450/AEM400/1000cc/AFPR, E85, R8 Coils, Nubcake Tuned. Fastest RS6 in the USA :)
May 22nd, 2016, 17:00 #24Closest I could find at 3Bar was:
0280156167 (Blue RS6) - 380~400cc
0280155968 (Big Green) - 415
0280155892 (225TT 1.8t) - 386cc
These are one of the newest Bosch designs (EV14) that everyone is using with the 5v 1.8t motors which should match our combustion chambers well.
http://www.bosch-motorsport.com/medi...5993867pdf.pdf The EV6 (RS6) injectors are compatible with the right EV12 & EV14 injectors. My Turbo just went out in the TT (K04 also) so of course I'm upgrading the daily driver as 225 + downpipe/exhaust, & tune (probably around 260bhp) aren't enough. I'm going with a modified K04 (Frankenturbo) and 550cc injectors, bigger MAF, and new tune. The mod has been out for the 1.8t for almost 5yrs and everyone is running cooler EGT's and about 290~300lb/ft of TQ and about 280~290bhp at the wheels, all from a 1.8t. Like the RS6 (very similar motors actually), the Rods are the limit and everyone says stop at 300lb/ft unless you replace the rods.
http://www.usrallyteam.com/content/p...ector_data.xls2003 White RS6 2013 Midnight Blue S5
2013 Daytona RS5 2x944 Turbo's 1974 911 w/'91 3.6ltr motor
Roy, WA
May 22nd, 2016, 18:37 #25Some more interesting Bosch reading:
http://www.bosch-motorsport.com/medi...5912459pdf.pdf
http://www.bosch-motorsport.com/medi...5957003pdf.pdf
http://www.bosch-motorsport.com/medi...5993867pdf.pdf
Although you can get a little higher flow rate from just running a higher fuel pressure regulator. Either way you need a custom tune to go with it. Costly for the dyno time but you can probably get more power fairly easily compared to off the shelf tunes with lower EGT's but of course at a cost to the tuner for his time & dyno. I may go this route down the road with AMD, I they've done hours and hours of this on just about every Audi including the RS6. I think AvusRS6 car has had a bit of work on the Dyno at AMD, not just an over the counter tune.Last edited by hahnmgh63; May 22nd, 2016 at 18:49.2003 White RS6 2013 Midnight Blue S5
2013 Daytona RS5 2x944 Turbo's 1974 911 w/'91 3.6ltr motor
Roy, WA
May 22nd, 2016, 21:56 #26
May 24th, 2016, 12:54 #27Part number on the injectors is 0280158298. These are EV4 and need the EV14 adapter for the RS6 wire harness.
https://www.fiveomotorsport.com/bosc...16-hole-nozzle03 RS6 Daytona Grey - EFI Express - 01e - SRM K24 - Aquamist - 495whp/580ft-lbs
May 24th, 2016, 14:30 #28Registered User
- Join Date
- Nov 2011
- Location
- Ohio
- Posts
- 441
This looks tempting?!?
http://www.amazon.com/GooDeal-Inject.../dp/B00ZH1G0ISBB GT28's w/ Tial Wastegates, Full 3" Open Exhaust, Wagners, Billet Triple Disk Converter, Built Trans, Exedy Friction Disks, ECU/TCU Tuned, 450/AEM400/1000cc/AFPR, E85, R8 Coils, Nubcake Tuned. Fastest RS6 in the USA :)
May 24th, 2016, 15:02 #29Registered User
- Join Date
- Nov 2011
- Location
- Ohio
- Posts
- 441
Also... this is the best price as the ford part number crosses with the Bosch part number...
http://www.newegg.com/Product/Produc...Q&gclsrc=aw.dsBB GT28's w/ Tial Wastegates, Full 3" Open Exhaust, Wagners, Billet Triple Disk Converter, Built Trans, Exedy Friction Disks, ECU/TCU Tuned, 450/AEM400/1000cc/AFPR, E85, R8 Coils, Nubcake Tuned. Fastest RS6 in the USA :)