Daytona Wednesday

[RS2racer]

I've never posted pics of my Beast... So here are a few.

[lswing]

Nice wheels and tint, clean. You still on DRC, looks a bit high in the back, or just parking?

[kruat]

Those are only 19s? They look huge. And I agree, seems a little high in the rear.

[RS2racer]

OEM B7 RS4 19's courtesy of Jimmy N from the forum, it's high on the back because I was doing tuning runs when I took these pics - no spare tire in the back, Optima battery, almost no gas in the tank , no tools, etc. It really jacks it up when you do crazy things like that

And, yes DRC which is leak free but I'm not a fan of the ride. I am thinking Koni's Sports on oem springs , or maybe H&R's.

[DHall1]

H&R sports on my daily driven RS. Excellent ride for this 50 something gear head. I like the ability to fine tune ride height. Good value for 1100.

[RS2racer]

^^^ that's the ride height I'm looking for ! what shocks/struts are you on DH ?

Those VMR's look the business !

[DHall1]

H&R sport coilovers for the A6 4.2

Perfect ride for a daily. No bounce

Hotchkis sways

Tight 1 finger at all 4 corners

Vmr 19x9.5 et33 no spacers

Pss 255 35 19

[DHall1]

This is tight 1 finger gaps on my Avus. Better angle

KW V3s. Slightly higher spring rate

Oem 5 spokes 19x9 et30

[RS2racer]

H&R sport coilovers for the A6 4.2

Perfect ride for a daily. No bounce

Hotchkis sways

Tight 1 finger at all 4 corners

Vmr 19x9.5 et33 no spacers

Pss 255 35 19

Ha ! that's the CO setup I had on my old 2003 S6 Avant and the car rode better than my Rs6 does currently....so glad to hear you're liking it for the RS . My cars already has the H bars installed with all new upper and lower control arm bushings ....so almost there.

I just need to search old posts to see what to do with the hydraulic lines once I take out the drc stuff. Thanks for sharing.