For sale is a set of used JHM rotors with about approx. 1 year or 10K miles left on the rotors.
These cost $795 per set new from JHM however if you already have the hats a rotor ring replacement set is only $565 from JHM, so these will get you in the game & when you replace rotors you save $$
Makes a real nice upgrade for A6/S6/AllRoad Cars
Fitment: Direct Replacement for OEM #4B3 615 301E for the Left Front & 4B3 615 302A for the Right Front C5 RS6, All
Fitment: Also believed to fit as an upgrade for the following:
Make Model Year Range
AudiA6 - C52000 - 2004
AudiAllroad - C52000 - 2005
Fitment:
Note: please do your research before you buy to make sure this is correct for your vehicle.
Stock RS6 Rotors vs. JHM -Rotor Weight: Stock = 27.5lbs(each), JHM = 21lbs(each) - 24% LIGHTER, 6.5lbs less each - 13lbs total
-Rotor Cooling Air-gap: Stock = 13mm(.512"), JHM = 18.5mm(.728") - LARGER for better cooling
-Rotor Cooling Center Fin Design: Stock = Straight Fin, JHM = Airfoil - MORE EFFICIENT for better cooling
-Rotor OD: Stock = 365mm(14.4"), JHM = 365mm(14.4") - SAME
-Rotor Thickness: Stock = 34mm(1.34"), JHM = 34mm(.1.34") - SAME
-Bolt pattern: - SAME (fits like an OEM rotor would)
For purchase info please visit my cross post on Audizine
http://www.audizine.com/forum/showth...(365mm-x-34mm)
Reply With Quote