-
December 22nd, 2003, 00:35
#1
Registered User
Ran At The Track With O.c.t Chip And Milltek Exhaust
HI GUYS,today my dad and i finally ran at the track with the o.c.t chip,diverter valves and milltek exhaust on the rs6,at atco racewayin nj .My dad ran five runs and i ran two runs
My dad ran:
12.41@111.48 60'-1.82
12.42@111.77 60'-1.83
12.52@109.97 60'-1.80
12.63@111.08 60'-1.97
12.67@110.24 60'-1.91
i ran:
12.58@111.95 60'-1.97
12.56@110.03 60'-1.90
a few months ago we ran stock with just the milltek exhaust and we ran:
13.41@105.32
13.74@102.57
13.71@102.80
Special thanks to stratmosphere-bob and pete
and special thanks to the crew at speedtechnik,mitch,pete,brian and andy.
p.s still looking to race an E55
-
December 22nd, 2003, 13:32
#2
Admin
Looks like the old man is faster
Quite good times.
To do mid 12 second runs in a (huge) car like the RS6 is not bad at all.
When you find that E55 tell us how it went. With a mid-12 you should have a good chance!
-
December 22nd, 2003, 13:44
#3
Moderator
Originally posted by Erik
Looks like the old man is faster
Quite good times.
To do mid 12 second runs in a (huge) car like the RS6 is not bad at all.
When you find that E55 tell us how it went. With a mid-12 you should have a good chance!
I agree...
I think one m5 owner managed to get a 11.95 without any mods! That's the benchmark to beat.
-
December 22nd, 2003, 14:45
#4
Admin
11.95... I don't think so.
With an inaccurate G-Tech perhaps...and slicks!
Did some searching:
http://www.m5board.com/vbulletin/sho...uarter+mile+m5
"12.98@107.15
This is by far the best run I have ever seen on my G-tech."
And...this is a Hohenester chipped RS6 - stage 1.
However this G-Tech version is not the most exact of things, but it gives a hint.
http://www.rs6.com/articles/008.html
-
December 22nd, 2003, 16:05
#5
Moderator
ooops, My bad.
I must of mistook the times with some other times from elsewhere, probally from the R32 TT 1/4mile.....
I was refering to M5board member ELEVENS, who's had the fastest 1/4 miles time(s) with a standard M5.
This was a time of 12.861 seconds.
http://www.m5board.com/vbulletin/sho...threadid=31288
Looks like the chip allows the Rs6 to beat the M5 in this test!
-
December 22nd, 2003, 22:04
#6
Registered User
-
December 23rd, 2003, 18:31
#7
Registered User
:vsad2: :vsad2: :vsad2:
I miss my BEAST!!!!!!!!!!!!!
Wow, a whole second off the 1/4, that's impressive. I felt that the car was noticeably faster with Chip and exhaust!
The E55 running 12.5, IMO probably had a hard time hooking up. I would think on a moving start the E55 is faster.
-
December 23rd, 2003, 18:54
#8
Registered User
Re: Ran At The Track With O.c.t Chip And Milltek Exhaust
[QUOTE]Originally posted by Fast One
[B]HI GUYS,today my dad and i finally ran at the track with the o.c.t chip,diverter valves and milltek exhaust on the rs6,at atco racewayin nj .My dad ran five runs and i ran two runs
My dad ran:
12.41@111.48 60'-1.82
12.42@111.77 60'-1.83
12.52@109.97 60'-1.80
12.63@111.08 60'-1.97
12.67@110.24 60'-1.91
i ran:
12.58@111.95 60'-1.97
12.56@110.03 60'-1.90
Man he had outstanding 60' times!! I would kill for a 1.8. Best ever was a 1.981 most are 2.05-2.11 for me.(A6 Tip)
Do you happen to have the other split times?? 330, 1/8 time and mph??
IMpressive, well done
-
December 23rd, 2003, 21:21
#9
Registered User
Milltek Exhaust
Fast one, how good is the Milltek system? Is it easy to put on? Any problems? Would like to know as I am considering one for my S4V8. Any input would be much appreciated. Thanx.
:s4addict: -Bimmerhead
-
December 23rd, 2003, 21:53
#10
Registered User
You going through Stratmosphere for the Miltek?? If so talk to Bob or Pete and say Joe (A6)sent you, it may double the price : ) j/k. Might help you save a buck or two.
-
December 24th, 2003, 13:33
#11
Registered User
Originally posted by ming 2.7t
You going through Stratmosphere for the Miltek?? If so talk to Bob or Pete and say Joe (A6)sent you, it may double the price : ) j/k. Might help you save a buck or two.
Joe, sounds like they did ya proud, do you like your system? Anything to report? Good or Bad. I am a very cautious about add- ons or performance mods. I like proven and time tested things. I would be very thankful for any input you may have. Have a great holiday season.
:s4addict: -Bimmerhead
-
December 24th, 2003, 22:33
#12
Registered User
The Miltek for my A6 is good quality. Sound was almost like stock, till you started to hit the gas hard. Then it was almost like stock but from the outside, you knew something was not stock. A very quiet system. Cat back is what I have and it did open the car up, in the higher rev's. I have the DP's shipping out to me this week to finish off the system.
I cannot tell you what they sound like on a RS6, but if they hold to the past history, it will be good quality, kinda quiet, and will compliment the car nicely.
Strat is a good place to get them. Bob(we call him evil Bob, cause we end up spending money on mod stuff) is a good person and they will do you right.
On the other side, some A6 people have had great success having custom catback systems made for 2/3's the price. I still went with the Miltek and Strat.
I hope the DP's are as nice as the exhaust is!! If so, I'll be a happy camper.
-
December 25th, 2003, 22:40
#13
Registered User
Hi bimmerhead,the milltek on the rs6 sounds awesome,an exotic growl,but not too loud.I would imagine it would sound great on the new S4V8...........................................avu s you might be right about a race from a roll,cant wait to race one[E55]:bang: Bob from Stratmosphere told me that o.c.t is making a chip for the tranny,so that should help in the quarter mile.Also thinking about downpipes and high flow cats,milltek just came out with that setup.
[Ming]joe here are the rest of the numbers
RUN1 RUN2 RUN3
330' 5.214 5.386 5.216
1/8 8.016 8.205 8.063
MPH 88.35 88.12 87.80
990' 10.319 10.329 10.403
RUN4 RUN5 RUN6
330' 5.217 5.397 5.319
1/8 8.032 8.195 8.130
MPH 87.80 88.35 87.91
990' 10.336 10.495 10.446
RUN7 330' 5.400
1/8 8.238
MPH 87.28
990' 10.56
-
December 26th, 2003, 03:19
#14
Registered User
Thanks for all the input guys. It helps to talk to others instead of just reps trying to sell something. Hope the Holidays find you all happy and safe.
:s4addict: -Bimmerhead
-
January 3rd, 2004, 16:44
#15
Registered User
Those are some great times, we ran.....
11.88 at 117 with the addition of a tip chip.
-
January 3rd, 2004, 17:22
#16
Admin
Re: Those are some great times, we ran.....
Originally posted by Speed Technik
11.88 at 117 with the addition of a tip chip.
11.88 secs and 117 mph (188 km/h) is an excellent time for an RS6!
Do you have the actual paper? Or is it G-Teched?
-
January 3rd, 2004, 17:44
#17
Registered User
ATCO
Have the slip somewhere in Mitch's house. Prior to tip chip, we ran a bit better than Fast One.
-
January 3rd, 2004, 18:33
#18
Admin
Brian, that's ~520-530 hp according to 402m.com.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules