I tried to register a couple of times but my account was deactivated every time.
I tried to register a couple of times but my account was deactivated every time.
The larger starter is the RS6 starter, I'm using the smaller B7 RS4 starter as it mates to the gearbox I'm using and the starter ring on the flywheel.
No real engine bay mods as when you remove the Auto and put the manual in place you make a lot of additional room for the larger turbos/headers. I'm not sure how you would fit larger housings with the auto still in place.
OZ RS6, 0A3 manual, Tilton Carbon/Carbon Triple Plate, twin GTX3071s, twin Tial mv-s gates, Custom ICs, BMC OTA filters, A8 MAFs, 980cc injectors, etc
Originally started with the RS6 MAFs but they maxed out at 15psi through the GTX30s. Hence I modified the stock airbox and mounting to accept B5 S4/R32 MAFs. These only added a little bit of extra air and anything around 17psi maxed out the R32 MAFs/sensors. So then went to the following setup with B5 RS4 MAFs. This is the home built intake, I have since added some brackets to hold things in place and painted the silver/grey intake ducts to Matt Black.
This is what it looked like mocked up at home.
I then had some slight variations in the airflow so decided to change over to the A8 MAFs which are exactly the same as the B5 RS4 except they have flow straighteners on them. A8 MAF on the left.
Last edited by milka; March 11th, 2014 at 06:16.
OZ RS6, 0A3 manual, Tilton Carbon/Carbon Triple Plate, twin GTX3071s, twin Tial mv-s gates, Custom ICs, BMC OTA filters, A8 MAFs, 980cc injectors, etc
Heh, good thing I don't plan on going manual, then. Living in the DC area makes stickshift a non-starter for me. Like I said, I love just about everything about your build, that trans swap tho, freakin' kills me...
Also, what's up with the multicolor puzzle pieces? Just a cheap way to foam out the garage floor? I can understand that, but did you not have a choice of color(s)?
Those custom intakes are pretty wicked, but the engine bay just doesn't look right without the top engine cover for me. Maybe mock something up to sit between them and over top of the engine? Not enough CF!
Happy build, hope it makes your beast everything you've ever wanted it to be!
O_E
#905530 - Brilliant Black on Ebony. Sorted, running strong, ready for a new owner.
No, I am not the board admin - that's Erik (from Sweden), I'm Other_Erik (from the US)
LOL, that's sooo funny, I never thought anyone might think that's my garage, but now I can sort of understand why.... That's my lounge room and they tiles are for my son, so he does not hit his head etc on the wooden floor boards. That intake works great have been driving it for months with great results, that dyno was also done with that setup too.
In the process of painting the intake manifold Matt Black, I may yet make a custom CF cover but looks is not my first concern. I'm trying to create the ultimate sleeper, stock looks on the outside, fully legal and hammers ;-)
OZ RS6, 0A3 manual, Tilton Carbon/Carbon Triple Plate, twin GTX3071s, twin Tial mv-s gates, Custom ICs, BMC OTA filters, A8 MAFs, 980cc injectors, etc
Saw in your original post you're running 265/35-19's, doesn't that throw the speedo off a bit, or you using reluctor wheels? I'm trying to go wide for my summer wheels/tires setup, thinking about going stock fronts 255/40-18 and going 295/35-18 in the rear, but worried about losing the bead running 11.5" wide tires on a 8" wide rim... At your power level, are you experiencing any loss of traction under hard acceleration? If not, then I have a long time before I have to worry about going wider in the rear, can save myself a couple hundred bucks on the next set of tires...
O_E
#905530 - Brilliant Black on Ebony. Sorted, running strong, ready for a new owner.
No, I am not the board admin - that's Erik (from Sweden), I'm Other_Erik (from the US)
Ok, so the mafs right after the filter are the active ones then? I'm guessing the ones that go into the inlet tubing are there just to simplify mounting rather than make a mount?
Avus RS 6, RNS-E/BT/RVC, Eurocharged/MTM, SuperSports, PSS9/Hotchkis, SS Lines/EBC Reds, FMU/BMC, Sportec vents, 007's, 9500ci, Black Optics/Headlights/Trim/Rims, CC; coming soon: stage 3 snow meth
The guy is smart. I think he needs to patriate to the us and open up a shop :-)
Avus RS 6, RNS-E/BT/RVC, Eurocharged/MTM, SuperSports, PSS9/Hotchkis, SS Lines/EBC Reds, FMU/BMC, Sportec vents, 007's, 9500ci, Black Optics/Headlights/Trim/Rims, CC; coming soon: stage 3 snow meth
Yeah it will change the speedo a touch, but it actually changes it so that it is spot on as the speed normally reads a little low from factory.
I would not be running 295s on an 8' rim, hence why I'm looking at running R8 Rims with 255/35/19s front and 295/30/19s rear.
I am getting a little traction loss but that's the reason I am looking at the R8 rims (I have 40:60 and up to 20:80 torque split). This is also why I have installed an LSD in the front diff.
On Stock position/size/turbos and Auto I would not run staggered but rather get the best set of 265 or 275 sticky rubber you can afford.
OZ RS6, 0A3 manual, Tilton Carbon/Carbon Triple Plate, twin GTX3071s, twin Tial mv-s gates, Custom ICs, BMC OTA filters, A8 MAFs, 980cc injectors, etc
Yep, exactly what I did. The MAFs that sit in the original position are S4/R32 units with the sensors cut and the inside of the pipe smoothed out. they are also positioned such that I can bolt a bracket down to hold them in place. Also the y-pipe Pipe at the back of the engine has been opened up to nearly twice the diameter as that is a bottle neck with a larger turbo mouth (same sort of dia as the RS6 turbo inlet)
I'll be in Vegas 11th-16th April, but only for work not moving over there, yet.... ;-) Would be heaps easier for me too as most things here have to come from the US anyway.
OZ RS6, 0A3 manual, Tilton Carbon/Carbon Triple Plate, twin GTX3071s, twin Tial mv-s gates, Custom ICs, BMC OTA filters, A8 MAFs, 980cc injectors, etc
That intake is great! I was just under the hood last night using dryer vent to mock up something similar. I have saved your pics for reference. Thanks for sharing.
'03 RS6: Full APR EMCS/TCU, Nurburgring Bronze 19x8.5, Freshly Rebuilt Turbos, Gutted Precats, Stern Racing Mounts, SAI Delete, Aux Radiator Delete, Venair Hoses, Koni Yellows.....
Avus RS 6, RNS-E/BT/RVC, Eurocharged/MTM, SuperSports, PSS9/Hotchkis, SS Lines/EBC Reds, FMU/BMC, Sportec vents, 007's, 9500ci, Black Optics/Headlights/Trim/Rims, CC; coming soon: stage 3 snow meth
Any progress????