How Forward are the front axles coming out of the transmission? Are they in the similar location is ours, or are the way forward?
How Forward are the front axles coming out of the transmission? Are they in the similar location is ours, or are the way forward?
Subscribed.
Avus Silver RS6 - Viper Stage 2 ECU/TCU - Water/Meth Injection - Frozen Rotors - Hbars - clear corners - Hella smoked tails - gutted precats
Attachment 14890
The Axles are forward on the A8 D3 6HP26, at least in the version that goes in the 4.2. The Phaeton tranny pic looks like a better fit as far as the axles. A much different looking case compared to the A8. I wonder if that pic is of a 6HP19A or a 6HP26A. Check out this pic of the front axle on the 6HP26A.
2003 White RS6 2013 Midnight Blue S5
2013 Daytona RS5 2x944 Turbo's 1974 911 w/'91 3.6ltr motor
Roy, WA
The phaeton transmission picture that i posted is most likely a six hp nineteen. Sources say that the phaeton came with a six hp twentysix. I need to somehow verify that or find a model that did.
I think your right. The 6HP19 probably came with the VR6 Phaeton and the 6HP26 with the 4.2L
2003 White RS6 2013 Midnight Blue S5
2013 Daytona RS5 2x944 Turbo's 1974 911 w/'91 3.6ltr motor
Roy, WA
I need to find a good line on one, and then I'm going to install it.
05 Cayenne turbo
Ok, good info.
Still need to check on wiring schematics for both cars. The transmission will work just fine, I'm sure, as long as it does not trigger a failsafe where the trans will lock into 4th gear. If that happens, I'm going to have to bypass the TCU all together and try to feed it separate input's, or run a standalone computer to operate it.
This is odd, it shows a 2004-2006 phaeton with 4.2 having a 6hp19... Hmmm
http://www.ebay.com/itm/TRANSMISSION...4591b5&vxp=mtr
Seems to be some misinformation, i dont think the phaeton came with the 26 at all, i cannot find a trans from one. Appears to be a myth.
The axle line is ~7" from the motor on yours. the 6HP26 is around 2". You need to put a 5" spacer to have the axles straight. You also need to extend your TC by 5". Only the 6HP19 would fit without major fabrication.
05 Cayenne turbo
i had a VR6 Phaeton and it had the 5hp gearbox, the early ones used it until 2004, except for the V8 and V6 diesel which came from the beginning with the 6hp, while the V10 Tdi and W12 used the 5hp until nowadays. however i didn't know they used a 6hp19 for the V8, i thought it would have been the 6hp26, makes sense...
as a note, VW on a SB recommended changing the gearbox oil every 30k km on the 5hp24A for the W12 and V10 engines, after having too many early failures on the first sold cars.
Ex.: 2004 Audi RS6 C5 ABT, Milltek non-resonated, 19" RS4 B7 rims, RNS-E - SOLD
2004 AUdi RS6 C5, SE exhaust, RNS-E, 19' original rims - SOLD
Now :2009 Audi RS6 C6 - stock yet pretty fast
Anyone no if the transmission out of the 2008-2010 rs6 has a more rearward front axle placement.
The v10 tdi uses a 5hp24?!?!? That thing weighs WAY more than the rs6 and has WAY more torque than ours, especially tuned. Hell, they pulled a jumbo jet with it!
I want an internal parts list of that 5hp24...
I have rebuilt a lot of 5hp24's, but never one because it failed from clutches or abuse. I have rebuilt them due to piston failures, all the 19 series that I have every belt we're due to drum failures.
It seems that the rs6 finds the clutch pack weakness.
If I find out I cannot get a 6HP that will fit into the car, then I need to figure out if I'm going to just rebuild mine, or throw my six speed manual into the car. Anybody know what flywheel I will need to use, ha ha
I have randomly stumbled upon this file at nefmoto forums. Not sure if it can be of any use, since it's for 5hp19 - but my guess would be that 5hp24 is virtually the same. Now we just need the 6hp26 diagram.