Which wheels do you have on your RS6 C5

[Jimmy]

Where did you get them installed? Not exactly comfortable with a Town Tire doing this. Also...would any Audi 19 x 9 rims fit...in theory? I like those rims although find it funny it came from a rs4...but, trust me I am not knowledgeable on what owners of RS6's have done successfully. I will only do a change if it involves NO mods ie no spacers or tweaks to the fenders etc... Let me know if anyone is willing to talk live on this. Thanks!!

I 'installed' them in my garage with a jack and a 17mm socket wrench. Easy to find a set with tires already mounted as the Rs4 uses the same size as the C5 RS6. www.enimotorsports.com up in Brookfield is also a place I say you can trust to mount and balance. What's so funny about the rims being from an RS4? They rock and fit perfectly with no spacers. They seem to be pretty stout too, as far as 19" rims go, with a thin sidewall a lot of rims will take a pothole in the form of a bend. Yes, most any modern Audi rim will bolt-on...its the offset you have to be mindful of. You have to find the right fit from between a 35-25mm offset (for no spacers).

[FJC711]

IM partial to these hartmann rims... but id need like at least a 20mm spacer.....

[Greyyork]

That is such a beautiful color. @RSSIK

[chrisaudi4.2]

here is my 2000 a6 4.2 with miro 111 5x120 Redrill to 5x112 19x9.5 all around with 245/35/19 front are ET20 with a 3mm spacer final ET17 Rears are ET20 with a 5mm spacer final ET15[IMG]http://i569.photobucket.com/albums/ss132/chrissr20det_photo/phpX9Ql4KPM-1.jpg[/IMG]

[mik15]

i have just installed these rims, i've always liked the way they look and i think they look good on the RS6 as well, i've seen it on other C5 RS6 and they helped me make this decision...

[ttboost]

Yup, RS4 wheels. Very nice!!! Had a set lined up myself, but they were banged up a little and passed...

[mik15]

these have just been refurbished by the previous owner and when we did the balancing they seemed alright, we'll see tomorrow how they feel on a longer trip, my 18" had a light rumble around 65-70mph as one is slightly bent, it's how it came with the car, i hope that with new rims i will also get rid of the that rumble...

I think the RS4 wheels make it look a bit younger and sportier, the 18 ones are too conservative, if i had found the 5 spoke RS6 ones i would've bought it, but can't find it here and buying it over the internet it's a no for me as i can't be sure that they're ok...plus the RS4 ones are plug&play, no need for spacers or center rings which i don't like....

[ttboost]

these have just been refurbished by the previous owner and when we did the balancing they seemed alright, we'll see tomorrow how they feel on a longer trip, my 18" had a light rumble around 65-70mph as one is slightly bent, it's how it came with the car, i hope that with new rims i will also get rid of the that rumble...

I think the RS4 wheels make it look a bit younger and sportier, the 18 ones are too conservative, if i had found the 5 spoke RS6 ones i would've bought it, but can't find it here and buying it over the internet it's a no for me as i can't be sure that they're ok...plus the RS4 ones are plug&play, no need for spacers or center rings which i don't like....

Yeah..I love the look of your RS4 wheels too...I would have powdercoated mine black anyway, so I got lucky with my black Volk VR G2's, which incidently were off a RS4, so same size too...

[chrisaudi4.2]

here are a little more pictures of my bebe.lol again running miro 111 19x9.5 all 4 corners 5x120 Et20 Redrill to 5x112 with Federal 595 Evo 245/35/19 all 4 corner with a 3mm spacer in the front Final Et17.and 5mm in the Rear at a Final Et15..........the wheels are plasti dip color red......

[ttboost]

How do they not rub?

[chrisaudi4.2]

How do they not rub?

It Rub in the top screw of the front fender liner,but I Remove it.

[Primo]

Very cool, same rims as I got, except the color

[ttboost]

Hmm..this is the 2nd or 3rd thread that I've seen these wheels...kinda liken 'em...

[Elevens]

Hmm..this is the 2nd or 3rd thread that I've seen these wheels...kinda liken 'em...

4 shipped to the door for $1100.00, is very enticing indeed. I wonder how good they really are? Weight and quality.................

[repda503]

Elevens, I did a little research and everywhere I read said they are very good quality for cast wheels. Weight is ~25lbs.

[ttboost]

Yeesh...heavier than I thought...

[v8a6]

Lookin good Chris

Got some 20 inch 'peelers' for the S6. Did a test fit on the A6 today. Too heavy for my RS6, but should be fine on the wagon.

[UrS6]

Not super light but they are cheap. It seems that there are a lot of BBS and OZ wheels that are just as heavy or heavier for 2-4 times the money. What is the weight of an equivalent VMR wheel? I'm shopping now so I'm following this. Anyone got some Sportecs for sale?

Yeesh...heavier than I thought...