Results 1 to 9 of 9

Thread: oxygen sensors question

  1. #1
    Registered User mik15's Avatar
    Join Date
    Jun 2011
    Location
    For now in Abu Dhabi
    Posts
    709

    oxygen sensors question

    i've started gathering the items which will be replaced when the engine comes out, but i've stumbled on the oxygen sensor as there is no consistency on the information i have found on internet and here as well...

    according to Bosch, the p/n for all 4 sensors is 16073...
    according to what i've found on the forum the p/n is 16544 for the front ones, and the rear left is Bosch 16069 and rear right is Bosch 16067...
    according to ETKA the p/n for all 4 is 1K0998262AB....

    i am confused now and don't want to order before i am sure that it is the right part! I have the 16073 for $99/piece, which seems to be a good price but i don't wanna pull the trigger yet until i'm sure! Could someone please help on this matter??

    Thanks a lot!
    Ex.: 2004 Audi RS6 C5 ABT, Milltek non-resonated, 19" RS4 B7 rims, RNS-E - SOLD
    2004 AUdi RS6 C5, SE exhaust, RNS-E, 19' original rims - SOLD
    Now :2009 Audi RS6 C6 - stock yet pretty fast

  2. #2
    Registered User mdegracia's Avatar
    Join Date
    Aug 2011
    Location
    Syracuse, NY
    Posts
    316
    I have ordered the O2's using that Bosch part number (16073) and that same exact price for my 2.8 avant. I can tell you first hand that the connectors will not mate up to the stock harness w/o modification (read "cutting out the key way") or swapping out the stock harness with the extra piece thats included.

    I didn't mind modifying the sensors for the 2.8, but would never consider that as an option for my RS.
    03 RS6 Daytona Grey - EFI Express - 01e - SRM K24 - Aquamist - 495whp/580ft-lbs

  3. #3
    Registered User mik15's Avatar
    Join Date
    Jun 2011
    Location
    For now in Abu Dhabi
    Posts
    709
    i definitely don't want to cut to stock harness...i've rather pay the extra $30/sensor and get the OEM ones from genuineaudiparts.com...i don't like either these kind of improvisations to my car,i thought that the Bosch ones are plug&play just like the original ones!
    Ex.: 2004 Audi RS6 C5 ABT, Milltek non-resonated, 19" RS4 B7 rims, RNS-E - SOLD
    2004 AUdi RS6 C5, SE exhaust, RNS-E, 19' original rims - SOLD
    Now :2009 Audi RS6 C6 - stock yet pretty fast

  4. #4
    Registered User repda503's Avatar
    Join Date
    Sep 2011
    Location
    Portland, OR
    Posts
    164
    Bosch won't fit? This is cheapest I found. Just need verification they are all correct before I pull the trigger...

    Bosch 02 sensors -
    Left secondary: $69.00 http://www.amazon.com/gp/product/B00...=AYZ062M1ZWK81
    Right secondary: $75.00 http://www.amazon.com/gp/product/B00...=AYZ062M1ZWK81
    Front primary: $102.79 http://www.rockauto.com/catalog/rafr...23-16544-23383

    EGT sensors -
    EGT 077919529D: $308.81 http://www.ecstuning.com/Search/077919529D/ES283132/
    EGT 077919529E: $395.79 http://www.ecstuning.com/Search/077919529E/ES283133/

  5. #5
    Registered User mik15's Avatar
    Join Date
    Jun 2011
    Location
    For now in Abu Dhabi
    Posts
    709
    the ones listed for $69 and $75 aren't Bosch, i've emailed them asking them to confirm whether the parts are genuine Bosch or not, of course they're not, as i suspected! The EGT's i got them both for $350, OEM, as there aren't any others! This is the p/n for the EGT set: 077998124 !
    Ex.: 2004 Audi RS6 C5 ABT, Milltek non-resonated, 19" RS4 B7 rims, RNS-E - SOLD
    2004 AUdi RS6 C5, SE exhaust, RNS-E, 19' original rims - SOLD
    Now :2009 Audi RS6 C6 - stock yet pretty fast

  6. #6
    Registered User repda503's Avatar
    Join Date
    Sep 2011
    Location
    Portland, OR
    Posts
    164
    $350 for both? Tell me your secrets. Links or it didn't happen

  7. #7
    Registered User mik15's Avatar
    Join Date
    Jun 2011
    Location
    For now in Abu Dhabi
    Posts
    709
    i bought it from Europe and since i am paying for them with a credit card linked to an address out of European Union and also have it shipped out of EU, i do not pay the taxes, with taxes the price would've been $400 plus shipping...anyway, genuineaudiparts has them for $460! This is the site i bought it from: www.hcsale.com, it's a Dutch company.
    Ex.: 2004 Audi RS6 C5 ABT, Milltek non-resonated, 19" RS4 B7 rims, RNS-E - SOLD
    2004 AUdi RS6 C5, SE exhaust, RNS-E, 19' original rims - SOLD
    Now :2009 Audi RS6 C6 - stock yet pretty fast

  8. #8
    Registered User hahnmgh63's Avatar
    Join Date
    Feb 2007
    Location
    Roy, WA
    Posts
    3,304
    This is correct:
    "according to Bosch, the p/n for all 4 sensors is 16073...
    according to what i've found on the forum the p/n is 16544 for the front ones, and the rear left is Bosch 16069 and rear right is Bosch 16067..."
    Cheapest I found was either to do an Amazon search or to also try http://www.autohausaz.com/audi-auto-parts/index.html
    2003 White RS6 2013 Midnight Blue S5
    2013 Daytona RS5 2x944 Turbo's 1974 911 w/'91 3.6ltr motor
    Roy, WA

  9. #9
    Registered User
    Join Date
    Jan 2013
    Location
    Lake Tahoe
    Posts
    155
    I know this is an old thread but part numbers are always changing. I don't want to run a 66 inch cord for the front oxygen sensors which bosch(16073) offers for all four sensors. I found Bosch 16287 which says fits direct. For all the belt driven v8s. Says cord is 24 in. I'm curious if anyone knows if that is long enough. I believe oe factory is 34 in. Does anyone know what works for the upstreams as far as length?
    Current Rides:
    2000 Toyota Celica GT-S Supercharged | 2000 Audi S4 Stage 3 | 2008 Audi TT 3.2 | 2003 Audi RS6 Avant

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •