I want them.....any good ideas?
I want them.....any good ideas?
SteveKen had some.
Steve, any report on the brand you had?
03 RS6 :: 01 allroad
I bought some on Ebay around a month ago. When I received them, the mounting bolts on both lights were broke. These metal bolts are screwed into the plastic housing of the lights and the plastic stresses and brakes. I contacted the seller and he sent two new tail lights. The new lights were not broke but the mounting points were cracked. I put some plastic weld on each of the bolts and installed them. They look great but are cheaply made. I purchased them from redcometm3 on Ebay.
This...best look for modern and not fake...similar to X5 and a few other cars...did have a loose cable, but fixed up and fine. I'll try and dig up a pic, a few of us have these. You can get them for less too...
http://www.ebay.com/itm/Audi-A6-4B-C...item1c2a49f587
Ace/Edge TC - Tozo Trans - MTM TCU - REVO/ME7 tune - Wagner IC's w/ Venair Hoses - Aux Radiator delete - Hotchkis Sways - Hawk HPS Pads - Koni Sport Struts - Scroll KO4 Turbos - Devil's Own WM - 421whp/452wtq on Mustang Dyno - http://www.audirssix.com
I never really looked at them close enough to see a brand name, etc.
I do know that the guy that snagged them up claimed that they were vintage ones and not like the new ones.
All I know is that I never had a problem with them and the fit and finish looked pretty stock.
2012 Q7 TDI S-Line - 2010 GTI - 2007 A3 3.2 S-Line - 2003 RS6
2001 Honda S2000 - 1977 Honda CBR 750-F2 - 1965 GMC 1500 WideSide
Mine are in.pro. Picture of box
210K miles rolled
I have the In Pro also and they are a great upgrade. Have had them on for around 4yrs and no problems with fit, finish, or operation. A nice looking more modern upgrade.
2003 White RS6 2013 Midnight Blue S5
2013 Daytona RS5 2x944 Turbo's 1974 911 w/'91 3.6ltr motor
Roy, WA
03 RS6 Ebony Pearl Effect on Ebony / Carbon Fiber / MTM TCU / Sportec Cooling / KWV3 Coilovers / Hotchkis Sway Bars / Stern Control Arms / HRE P40SC Wheels / Hawk HPS pads / RNS-E / + pedals / Rear Window Spoiler / Cleared Corners
Any pics of the black inpro mounted?
Avant please
RS6-03: Milltek, ModTurbos, WagnerIC, Mtm 380, PSS9, Rs6 9,5x21", OZ 10x19", Hotchkis...
RS2-94: Stroker 2,5L, Precision, CatCam, JE, Tial, Nira, H&R, MTM 8,5x18"...
Yea, the Red with the horizontal clear/white backup strip are the ones I have. They use a conventional bulb for the reverse & turn signal and LED's for the tail lights & brake lights. They do add a more modern look to the car even when not in use. They have never given me a autocheck bulb warning and all LED's are still functioning 4 yrs later.Attachment 13574
This was a pick I took just after getting my DRC recall done. About two days after getting the car back from the recall I ripped out the DRC system and installed my KW's. Been happy ever since.
2003 White RS6 2013 Midnight Blue S5
2013 Daytona RS5 2x944 Turbo's 1974 911 w/'91 3.6ltr motor
Roy, WA
Ace/Edge TC - Tozo Trans - MTM TCU - REVO/ME7 tune - Wagner IC's w/ Venair Hoses - Aux Radiator delete - Hotchkis Sways - Hawk HPS Pads - Koni Sport Struts - Scroll KO4 Turbos - Devil's Own WM - 421whp/452wtq on Mustang Dyno - http://www.audirssix.com
Thanks guys. For spending my money!
Daytona/Ebony/Carbon/SEE/RNS-E/19X9 Speedline "Peelers"