ive looked at the 2 DIYs i found...but neither of them say where to get the end cap to seal off the pipes of the intercooler? what is the size and where can i buy them. All i can find is this...http://www.siliconeintakes.com/produ...roducts_id=162
any help is greatly appreciated
2003 RS6//Fully Adjustable Suspension//VIPER ECU&TCU//Daytona Gray-Black
Fully straight piped from the turbos to tips!
Apikol Intake and D.O. Dual Nozzle Stage 2 Meth Kit
You can make your own with plumbing supplies from home depot. Oatey caps are the plugs most use.
2008 A4 2.0TQ Quartz Grey Metallic S-Line/Titanium Package
2017 A4 2.0TQ Glacier White Metallic Prestige Sport
2003 RS6 TOTALED.-----Searching for a replacement
Or you can leave the hoses attached and find "male" plugs vs "female" caps. I just used random bits lying around my garage:
Here's the IC test setup I put together, all parts from Home Depot. I don't remember exactly, but think I've got less than $25 - $30 in the pieces.
Steve
nice! thanks guys!
2003 RS6//Fully Adjustable Suspension//VIPER ECU&TCU//Daytona Gray-Black
Fully straight piped from the turbos to tips!
Apikol Intake and D.O. Dual Nozzle Stage 2 Meth Kit
Can do it all with Home Depot parts but a word of caution....make sure the cover is not pointed at you when you pump it up. If you go 10 psi on a 2 in diameter pipe you are at 30 pounds of pressure and it lets loose it is a little startling.
what PSI are you guys testing to?
03 RS6 Daytona Grey, APR Exhaust, PSS9...
Posting Permissions
Reply With Quote