Page 4 of 4 FirstFirst ... 234
Results 55 to 62 of 62

Thread: DIY: valve cover gasket replacement, cam tensioner gasket

  1. #55
    Registered User
    Join Date
    Feb 2012
    Location
    portland, OR
    Posts
    142
    As an update, I was able to finally get the bolt out after getting and angled drill attachment, drill a hole into the screw and then using an extractor bolt. One I did that and got the screw out, it was smooth sailing get the valve cover off and back on with flexing the coolant pipe. Now I am not sure if I have the fuel injectors seated all the way back in. Is there a way to tell. I did not put new Orings on as I would have needed a lot more work to get the whole rail out to do that.

  2. #56
    Registered User
    Join Date
    Apr 2019
    Location
    Annapolis, MD
    Posts
    311
    Glad to hear that you got it done...For the injectors, no way to tell really until you get some pressure on them. I did new o-rings on mine when I pulled the rail for the intake removal to do the suction jet pump and didn't have any issues seating them.

    I did do a set on my son's Toyota PU and had some issues with them leaking the first time around due to some of the o-rings getting cut just a little bit when seating, but that seems to be a common issue on those as they were leaking already when he got the truck. Just use your common sense and nose...you'll smell the fuel vapors if they are leaking once under pressure, but probably won't see any fuel leakage unless it's major.

  3. #57
    Registered User hahnmgh63's Avatar
    Join Date
    Feb 2007
    Location
    Roy, WA
    Posts
    3,238
    This guy is in Idaho and has all of the seals you need for a great price.
    https://www.mrinjectorparts.com/stor..._Products.html
    2003 White RS6 2013 Midnight Blue S5
    2013 Daytona RS5 2x944 Turbo's 1974 911 w/'91 3.6ltr motor
    Roy, WA

  4. #58
    Registered User
    Join Date
    Feb 2012
    Location
    portland, OR
    Posts
    142
    I noticed that he also does cleaning and rebuilds of injectors. Given how old our cars are, is it ever recommend after a certain timeframe to get injectors cleaned.

  5. #59
    Registered User hahnmgh63's Avatar
    Join Date
    Feb 2007
    Location
    Roy, WA
    Posts
    3,238
    I would guess with the crappy Ethanol mixture gas we have it would cause our injectors to wear out early. A check of the spray pattern would be good but if there is pitting from the Ethanol I'm not sure they can repair that, probably a replacement is in order. I'm lucky that I have an Ethanol free 92 Octane (R+M/2 for our Euro guys, not just MON so it's around 98MON) about 8mi away. And now with the higher prices it is not as wide of a margin above Ethanol premium anymore. I can say the car overall runs better and after swapping I get a whole 1/2mpg better.
    2003 White RS6 2013 Midnight Blue S5
    2013 Daytona RS5 2x944 Turbo's 1974 911 w/'91 3.6ltr motor
    Roy, WA

  6. #60
    Registered User
    Join Date
    Feb 2012
    Location
    portland, OR
    Posts
    142
    I noticed that the valve cover set comes with a half blue moon gasket but it does not look like it is used anywhere unless I am wrong. I know there is one placed under the cam tensioner bracket but it also comes with it's own half moon gasket.

  7. #61
    Registered User
    Join Date
    Apr 2019
    Location
    Annapolis, MD
    Posts
    311
    Yeah, you'll probably get some duplicates of stuff like this with gasket kits. Each manufacturer decides what they want to put in there...some aftermarket metal gaskets for under the tensioner assembly may not include the half moon, but the OEM does for sure.

  8. #62
    Registered User hahnmgh63's Avatar
    Join Date
    Feb 2007
    Location
    Roy, WA
    Posts
    3,238
    2003 White RS6 2013 Midnight Blue S5
    2013 Daytona RS5 2x944 Turbo's 1974 911 w/'91 3.6ltr motor
    Roy, WA

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •