Rotiform MIA 19x10. Don't remember his offset, it should be the ones around 30 offset.
Rotiform MIA 19x10. Don't remember his offset, it should be the ones around 30 offset.
Avus RS 6, RNS-E/BT/RVC, Eurocharged/MTM, SuperSports, PSS9/Hotchkis, SS Lines/EBC Reds, FMU/BMC, Sportec vents, 007's, 9500ci, Black Optics/Headlights/Trim/Rims, CC; coming soon: stage 3 snow meth
Avus RS 6, RNS-E/BT/RVC, Eurocharged/MTM, SuperSports, PSS9/Hotchkis, SS Lines/EBC Reds, FMU/BMC, Sportec vents, 007's, 9500ci, Black Optics/Headlights/Trim/Rims, CC; coming soon: stage 3 snow meth
I had a rubbing issue on right hand turns-near full lock deep inside the fender, running 19" OEM european rims and tyres. it turned out that the fender liner was not sitting flush against the body- had bulged out of shape a little after i had the wagner intercoolers installed. i fixed it with a couple of shallow screws through the high point of the fender liner into the body. No problems with the front left hand liner as it is still in shape and sits where it is supposed to be and not rubbing on tyre on full lefthand lock.
Last edited by aussie rs6; September 29th, 2011 at 19:30.
one could always trim the plastic instead of rolling the fenders~
Das Silberkugel - Eurocharged Stage 2/MTM/Level 10/Hotchkis/Koni/H&R
2015 Ducati 1299S Panigale
2014 Ducati Multistrada Granturismo
ah, Dremel....I would die without mine!
Das Silberkugel - Eurocharged Stage 2/MTM/Level 10/Hotchkis/Koni/H&R
2015 Ducati 1299S Panigale
2014 Ducati Multistrada Granturismo
Ace/Edge TC - Tozo Trans - MTM TCU - REVO/ME7 tune - Wagner IC's w/ Venair Hoses - Aux Radiator delete - Hotchkis Sways - Hawk HPS Pads - Koni Sport Struts - Scroll KO4 Turbos - Devil's Own WM - 421whp/452wtq on Mustang Dyno - http://www.audirssix.com