RS5 by RS QUATTRO

[youry]

lots of stuff now back in the car, missing the bucket seats at this stage.

[youry]

Some pics of the inside finsihed:



The blue of the pics are not very realitics (its a little darker in raality, the blue of the side pannels are closer)



roof celing in black alcantara


et la plage arrière aussi en alcantara


some stuff being made for the sound system improvement:

enclosure being covered with black alcantara



same enclosure done (just missing the subwoofers...)


Here is where the amp and 10F power cell is going:


The part (not yet covered) that will go on top of previous part:


the trunk with some parts in to check:


One of the side trunk panel (right one actually) with an opening to be able to go there if needed:

[youry]

here is pic of the sound system basically close to completion:






The panels are tighy fixed betwen themselves.

[youry]

Capristo exhaust installed:


http://www.youtube.com/watch?v=rrsGhKJzzfk

[youry]

To have special designed 21 inch 3 part forged wheels for the RS5, I went to Miami early febriary, have a visit the ADV1 guys and signed a contract with them.

I met Jordan and Miguel, cool guys.
here they are (Miguel on the left and Jordan at teh right):


When we arrived, it was clear I had arrived at teh right place, a white Gallardo was showing around.

this is the one:


A corvette as well was nearby...

At miami, its design and sales office. Production is in Calfornia. I was invited to go to Cliforanis to check the factory but it was too tight in our schedule ot make it work.

SPEC of the wheels will be 3 part 10X21 ET26 (ROTOR look bicolor with one spoke written RS QUATTRO and center hole allowign to place the OEM AUDI caps.

Finish will be as desired. exterior lip can be polished, polie with varnish , chrome, brushed or painted (always using powder technology whih is much lighter and stronger).
The center can be of one color or two colors (like the titane OEM rotor).

We can also know sell the ADV1 wheels (with exception of Germany).
All wheels being tailor made with diamter, width and ET as desired by customer

Really happy to have take a plane to go to Miami
I did come back dead though.

We had a bite at one of the italien restaurants at miami beach which we had to go since their name is "QUATTRO" as shown on this pic:


on saturday we had some free time we went to see the everglades.

A little video sequence taken with my Iphone on these airboats that go pretty fast at about 60Km/h or 40miles/h on the water.

Its a great feeling. we have the felign that you are sliding on the water and driving like a car on curves sideways... lots o fun...
http://www.youtube.com/watch?v=HIar1IL8tzQ

[youry]

We then worked on the air filters...


It appears that the original filters partially obstructs the air intake air boxes in the car thus affecting the airflow. On top of that, the OEM botom foam tends to come off and this after only 3600 miles!
photo of the original filter:

The new filters are made of foam and are thinner thus allowing optimal air flow. The flow is thus improved by 11%.

And on the dyno ?
We simply replaced the two OEM paper filters by foam filters with better design and this has led to a power gain of 6 HP and 9 Nm of torque without any further modification!



No doubt its worth it on a RS5 !

[youry]

this saturdays. a friend proposed to take some pics.

Here is one taken on the highway:



more pics will be posted soon...