I know I can get the Venair hose kit from Hoppen, but can someone post a link to where I can get the T-bolt clamps from? THANKS!! Also, if there is a cheaper place than Hoppen for the hoses, please let me know.
I know I can get the Venair hose kit from Hoppen, but can someone post a link to where I can get the T-bolt clamps from? THANKS!! Also, if there is a cheaper place than Hoppen for the hoses, please let me know.
Literally just ordered a set an hour ago:
http://www.votionspeed.com/servlet/t...mps/Categories
W>
2003 RS6 Mugello Blue - mods? Whatever Ben does....
Great Link!! Thank You!! What are the 3 sizes of the hoses. I use to know, but misplaced the info.
You should be fine with 6 2.5 and 6 2.25.
Avus RS 6, RNS-E/BT/RVC, Eurocharged/MTM, SuperSports, PSS9/Hotchkis, SS Lines/EBC Reds, FMU/BMC, Sportec vents, 007's, 9500ci, Black Optics/Headlights/Trim/Rims, CC; coming soon: stage 3 snow meth
This lists the size and quantity of T-bolt clamps needed for the install. http://www.rs6.com/showthread.php/20...ghlight=venair
Pat - Eisenmann race exhaust, Catless downpipes, KW V3's, H-Sport sways, 034 Control arms, Apikol diff mount, Sterns motor mounts, Forge dv's, Stainless brake lines, Venair hoses, Sportec vent mod, Euro tails, Viper Tuned ecu/tcu, DPE S20's 19x9.5, 275/30/19's
Thanks Guys!! I knew I saw this on an old post!!
Pat - Eisenmann race exhaust, Catless downpipes, KW V3's, H-Sport sways, 034 Control arms, Apikol diff mount, Sterns motor mounts, Forge dv's, Stainless brake lines, Venair hoses, Sportec vent mod, Euro tails, Viper Tuned ecu/tcu, DPE S20's 19x9.5, 275/30/19's
Ordered mine directly from Venair USA in FLA.
http://tuningvenair.us/products/auto_kits/audi
Called Hoppen and left message checking on availability and never got a call back.
W>
2003 RS6 Mugello Blue - mods? Whatever Ben does....
Full disclosure:
Hoppen got back to me today...too late.
W>
2003 RS6 Mugello Blue - mods? Whatever Ben does....
just to let you Guys know, we do have a Set aswell. It comes with Stainless Steel Norma Clamps.
The Hoses near the Turbo are Teflon coated und the lower Hoses at the Intercooler are 15mm longer ( stock hoses are a bit to short)
http://wagner-tuning.de/EN/products/...RS6HoseKit.php
Are the Venair hoses a little short as well, or just the stock ones? Are these norma clamps better than the T-Bolt? Opinions?
Avus RS 6, RNS-E/BT/RVC, Eurocharged/MTM, SuperSports, PSS9/Hotchkis, SS Lines/EBC Reds, FMU/BMC, Sportec vents, 007's, 9500ci, Black Optics/Headlights/Trim/Rims, CC; coming soon: stage 3 snow meth
yep, venairs are identical to stock. passenger side was pretty obvious that the hardpipe to intercooler hose was too short. 15mm would've helped a lot.
2003 RS6 - forsale
So it sounds like the Wagner hose kit is better, especially if you are going with Wagner I/C's eventually anyway. Just buy some T-bolts to go with them instead of the normas. Thanks for the input!
i blew the passenger side hose the first time around the block with the wagners and venairs. probably would've happened with the stock hoses... i had to reduce the engagement on the hard pipe side by almost 50% to make sure there's enough engagement on the intercooler side.
so far no blow offs, but then again, i don't have a boost gauge, so not sure if i'm even loosing boost.
2003 RS6 - forsale