I have for sale my stock DRC only 5,000Miles for Audi recall that was done on my DRC.
IF any body is interested please let me know.Thanks Jerry
I have for sale my stock DRC only 5,000Miles for Audi recall that was done on my DRC.
IF any body is interested please let me know.Thanks Jerry
Welcome to the forum, Jerry! Please add your location to your profile so others know where in the world you are...
Stats on your Rocket Ship 6???
Back on topic: If I remember correctly, you might have trouble shipping this as it is pressurized to 16-20 Bar...
I know when mine comes out, I will be using it as target practice with .50 tracers...and THEN I will send it back to Ingolstadt ...
SOLD - 03 RS6 Avus (905355)
Current - 03 Toyota Tacoma 4x4 double cab - the YETI, lifted, winched, snorkeled, lockered, skidded, geared
selling a DRC? you almost had me LOL
SOLD - 2003 RS6 Black on Black / SE / Solar / Carbon / APR ECU + TCU / Wagner Intercoolers / Fog light delete / RNS-E / LED tails / Clear Corners / Sportek Cooling / itg filters /
Welcome to the board, Jerry. I am prepared to offer up in trade for your DRC system a gently used ham sandwich, easy mayo. Only two bites taken, had to cut lunch short today.
My recall "fixed" DRC has lost pressure in one circuit, car is sidestepping over bumps lately. Of course, the dealer insists it's fine.
RS 6 is going to hibernate for winter soon... and get coilovers in the spring.
Thanks everybody
That's Ok Jerry, I guess you didn't know any better. I knew I would get some laughs reading this thread. Welcome aboard and enjoy the stay.
03 RS6, VIPER ECU, MTM TCU, Milltek Full Catless Non Res setup from Turbos to the boxes(ROAR'S), H&R Coilovers, Hotchkiss ARB's, 19x10's with 275-30-19 PSS's at each corner, Kenwood 9960 Head unit, V1 Radar Locator. 517 Trans Rebuild, ScrollProducts Turbo Rebuild.
Don't kid him Ben, California won't let you shoot a .50BMG, they'd be all over you down there, the socialists say the .50 is un-acceptable.
2003 White RS6 2013 Midnight Blue S5
2013 Daytona RS5 2x944 Turbo's 1974 911 w/'91 3.6ltr motor
Roy, WA
I'm interested in info on your Kw V3 source and installation. Can you give me a call to chat about them?
(Or anyone else who can provide information)
I believe we have exchanged info in the past about a group bu on front rotors we had made up?
Thanks, Jimmy S. 928-443-1082, or jimmys@cableone.net
I'll give you a call Jimmy when I get back stateside, I'm in Europe right now and should be back early next week. I purchased mine through a place called Static-X motorsports a few years ago which I wouldn't recommend as it was many months from taking my money to getting the KW's. I see Tire Rack started selling KW's for the RS6 so with their great customer service I would definitley go with them unless you can find them much cheaper elseware. They RS6 kit came with plugs for the DRC lines but I pulled the complete lines and central valves out of the car. All in all the KW's save about 40# or so over the DRC with lines & Central vavles and are completely adjustable. I'm running about 1" lower than most of the better DRC cars out there, I started about 1.5" lower and had no problems with rubbing but decided to raise it a bit for a little more traditional Euro look that didn't look slammed.
2003 White RS6 2013 Midnight Blue S5
2013 Daytona RS5 2x944 Turbo's 1974 911 w/'91 3.6ltr motor
Roy, WA