-
August 12th, 2003, 21:40
#1
Registered User
-
August 13th, 2003, 12:32
#2
Admin
Not sure I'm of much help but... First, I guess this is the RS6 you measured.
Secondly, the misano red RS6 Avant we chipped at ACE Competition / Hohenester did a confirmed 560 Nm of torque.
Not sure in which gear though as I was too busy with other things. I guess there's a limiter in some of the gears.
Try other gears and see what you get. You should reach a max of 560 Nm, if the technique is the same as the one used in the blue VAG diagnosis box.
-
August 13th, 2003, 13:48
#3
Moderator
Here are some useful conversions of power. Hope it's of use.
Thanks for sharing the charts and information you've gathered, with us.
-
August 13th, 2003, 13:56
#4
Registered User
Even if you measured a 490Nm torque those are quite impressive charts!
Thanks for sharing!
-
August 13th, 2003, 15:38
#5
Registered User
cool guys
The measurements were done on the RS6. I will have to try across all gears to see if changes are different. I will continue to share all my logging with this crew.
Maybe next time I'll make sure to include in Nm and lb/ft, or mbar and PSI.
Thanks for the conversion tools.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules