Just picked up my Recaro's / No airbags in the seats so following some advice on AudiWorld was going to bypass the system at the seat plug in by jumping the Yellow air bag plug (blue and white wires) NOT THE BROWN with a 4.7 ohm 1/2 w 5% resistor. I swapped the seatbealt arm and wire complete so that was a non issue.
Plugged in and have an Airbag warning light... will clear the fault codes today and see if it remains.
Will unbolt the remaining seat and use my jumper connector on just the Airbag circuit with the rest of the seat still plugged in to confirm my jumper is good, ie. the resistor value is good.
In the mean time if anyone has done this with the RS6 connectors please, any advice.
Thanks...
(yeah.. i could try and find some replacement bags for the Recaros... but they seem hard to come by??)