Tuning for the RS6?

[Nrn]

Is there any tuning products on the market yet for the RS6?
MTM or Hoenester?

Without the electronic stop at 250km/h the top speed should probably reach 300km/h, or what do you think?

Regards /Nicke

[Erik]

There will be a tuners section lateron.

I have a lot of material which will be posted later but so far please look here:

http://www.mtmonline.de/rs6/rs6.htm
http://www.mtmonline.de/rs6/mot.htm

http://www.bb-automobiltechnik.de/english/mau_rs6.html
http://www.bb-automobiltechnik.de/en...mau_v_rs6.html

306 km/h with BB stage 3...

Nothing from Hohenester yet:
http://www.hohenester-sport.de

[keke]

MTM and BB yes, also ABT,Wimmer rennsporttechnik and Digit Power and Sportec.The two last are based in Switzerland;all the tuners have a little tuning around 3000euros with around 500ch and between 650nm 700nm torque with vmax close to 300kmh

[Erik]

This one is quite nice. From SKN Tuning. Including the 'must-have' annoying sounds often common with German websites.

[Erik]

And from the front.

[Erik]

B&B Styled RS6.

[Erik]

And it's sport exhaust.

[Nrn]

I would be nice if they made a test and compared the tuners to one another! Always intresting to see if they perform as promised!
But one of the few test like that, I have read was made by the swedish magazine, Bilsport. And I somehow doubt that they will test it for the RS6

Regards /Nicke

[famoroso]

The RS6 Avant that we drove in June topped out at 280 km/h, and that was with a full tank of gas (not for long), and five, full-sized, adults!

A friend that is driving a MTM chipped version around, with 500 bhp, claims to have hit 310 kp/h.

Very impressive.

As an aside, my dealer (USA) called me today to let me know the order sheets will be available in December. He also started buttering me up regarding some price gouging that they will partake in.

Let's see... no Avant, no recaro interior, no nav plus (I consider the US nav to be Nav Minus actually), no piano black trim, etc., etc., but there will be dealership price gouging? I was not impressed. To the point where I am considering waiting and importing an Avant from Europe, outfitted the way I want.

[Nrn]

Originally posted by famoroso
The RS6 Avant that we drove in June topped out at 280 km/h, and that was with a full tank of gas (not for long), and five, full-sized, adults!

A friend that is driving a MTM chipped version around, with 500 bhp, claims to have hit 310 kp/h.

Very impressive.

Thats a pretty nice topspeed! :-) What has been modified except for the chipp if he reaches 500bhp?

Do you have any 0-200 km/h times after the upgrade?

Kind Regards /Nicke

[Erik]

Swedish company Dahlback Racing has already chipped a Luxembourg based RS6.
I wasn't able to get any more information but as soon there's a new one in the 'lab' I'll let you know more.

DBR is using MTM.

DBR

[Erik]

Sportec out of Switzerland has a chip for the RS6, Sportec Audi RS 500.

Sportec

368kW (500PS) @ 6100 rpm

615 Nm @ 3230 rpm

Measured with 19"
V-max. 304 km/h
0-100 km/h 5.1 sec. 4.5 sec. (chipped)
0-200 km/h 19.1 sec. 17.2 sec. (chipped)

[J.Seven]

Maybe with 18" wheeks the accelaration times would be better, but those 19" really ROCK.

J.Seven

[Erik]

I guess 17" and less can be forgotten on the RS6 but when measuring performance bolt on the 15" - 17" for best performance.

On the street, 19" or 20" for looks :cool2: :king:

[Erik]

BBS Challange 19" for the RS6.

I really hope they make more versions available, but this one is nice too.

[Nrn]

Originally posted by Erik B
I guess 17" and less can be forgotten on the RS6 but when measuring performance bolt on the 15" - 17" for best performance.

On the street, 19" or 20" for looks :cool2: :king:

I guess i would be pretty hard to fit 15" over those brakes

But maybe som lightweight 17" would fit, and I bet it would do some good for the preformance!

Kind Regards /Nicke

[Erik]

Originally posted by Nrn
I guess i would be pretty hard to fit 15" over those brakes

You need 18" for the RS6 unless you want smaller brakes...

[Nrn]

Originally posted by Erik B


You need 18" for the RS6 unless you want smaller brakes...

Nice, thats what I thought! Can u fit 18" over the 8 caliper drilled brakes aswell?

Regards /Nicke