Professional Help Needed!

[TekTalk]

Does anyone out there have the part numbers for rear discs and front discs for a 2002 RS6?

I need these for an engineer to look up the compound to see if they can be heat treated.

many thanks

Russ

[freerider]

I've taken these from ETKA:

You can choose between perforated or not (thus 8 part numbers).

Front: - left: b 4B3 615 301 B (ventilated) / b 4B3 615 301 E (ventilated/perforated)
- right: b 4B3 615 302 (ventilated) / b 4B3 615 302 A (ventilated/perforated)

--> size: 365x34mm 5/112

Back: - left: b 4B3 615 601 B / b 4B3 615 601 C (perforated)
- right: b 4B3 615 602 / b 4B3 615 602 A (perforated)
(there also all ventilated)

--> size: 335x22mm 5/112

Hope this helps.

[johnny bigballs]

4B3615302A & 4B3615301E i think are front drilles ones

[TekTalk]

I've taken these from ETKA:

You can choose between perforated or not (thus 8 part numbers).

Front: - left: b 4B3 615 301 B (ventilated) / b 4B3 615 301 E (ventilated/perforated)
- right: b 4B3 615 302 (ventilated) / b 4B3 615 302 A (ventilated/perforated)

--> size: 365x34mm 5/112

Back: - left: b 4B3 615 601 B / b 4B3 615 601 C (perforated)
- right: b 4B3 615 602 / b 4B3 615 602 A (perforated)
(there also all ventilated)

--> size: 335x22mm 5/112

Hope this helps.

Absolute star!!!

Mine are standard vented, not drilled.

I only joined this site yesterday, and am pleased I did!!!

[TekTalk]

4B3615302A & 4B3615301E i think are front drilles ones

Cheers Johnny!

[freerider]

Absolute star!!!

Mine are standard vented, not drilled.

I only joined this site yesterday, and am pleased I did!!!

No prob

I'm glad I finally had the chance to use ETKA for good use

If you need more part numbers, just shout.

[TekTalk]

No prob

I'm glad I finally had the chance to use ETKA for good use

If you need more part numbers, just shout.

Many thanks...