Search:

Also, since you did a manual conversion, Are you using a CPS from a 2.7t or are you using the OEM RS6 one with a bigger spacer? There is a spec for clearance but I know it will still work with a much...

I'd have to hook it up to mine to see if there is a measuring block but I would assume there is. I would actually removed it and see if it was damaged during the install. The Flywheel should have...

This almost for sure. Especially since you had just pulled it apart. Did you pull and re-install the sensor or leave it in the whole time? Easy enough to pull and take a look at it.

You should be able to just lower the engine a little and tilt it down at the back and pull the transmission separately, much more room with the manual. Sorry to hear about it, but at least you'll be...

Seems like something just came up if it worked for 400mi. I would double check the linkage at the Master cylinder first since that's the easiest. Then if it comes down to it you should be able to...

Also, with the O1E, due to the placement of the Slave cylinder, you get the best bleed obviously with a Power Bleeder but it helps if you have the rear of the car a little higher than the front, at...

A lot of the oil you see in the Intercoolers comes from the PVC system and not from the Turbos. How many miles on the car? If it is a fairly high mileage car it's still a good idea to rebuild the...