One of the oil cooler lines has abraded on of the aux radiators hard lines.
You can simply disconnect the aux radiators without putting in service position. You just have two block off two hoses.
Type: Posts; User: SteveKen
One of the oil cooler lines has abraded on of the aux radiators hard lines.
You can simply disconnect the aux radiators without putting in service position. You just have two block off two hoses.
My only other thought is that the leak could be one of the hoses to/from the aux radiator behind the intercooler.
I would say find a remanufactured OEM one if you really need one.
What makes you think that your pump is bad?
Consider replacing the reservoir if you have noise and a lot of turbulence in the...
Three of these wheels are OEM and one looks to be aftermarket.
Condition can be seen from the pictures. I'd say 5 or 6 on a 1 - 10 scale.
Blizzaks have a lot of tread of tread on them.
I...
19" BBS SR 027 (Wheels Set of 4)
5x112 bolt pattern
8.5 x 19 ET 32
Early Audi fitment with BBS's PFS hubcentric rings (ID = 57.1mm)
Two are in like new condition.
One has some curb rash and a...
Looks like the post is too old to edit.
Lowering the price of the EBC Reds to $150 shipped within continental US.
Forgot I had these.
Still sealed in plastic. Purchased from ECS Tuning.
https://www.rs6.com/attachment.php?attachmentid=19728&stc=1
...
Ah yes. Thanks for this, as I was going off of some old memories in my head.
I think the rad on all the NA cars supports the feed to the afterrun pump.
Over the weekend, I just disabled the aux rads on my latest purchase and they are independent of the radiator.
My last...
SOLD!!!
Picked it up yesterday.
Damn it I missed the part where it was Scotty that let this happen and part of the service centered around the 6spd conversion. Wish you would have hit me up to do the work, as I might have been...
I really wish that I had documented it but there is a really easy way to bypass everything to crank the engine
There is a 2 pin connector on the firewall that goes directly to the starter...
I've done this before, but only with the engine and transmission already out. I got the piston a little.crooked when retracting it and it popped back and broke the ring land that holds the piston...
Did you remove the plug in the crankshaft before you installed the flywheel? Also used thread locker and proper torching sequence on the flywheel bolts?
These are now sold.
I've got a set of set of 4 stock wheels for sale.
I have had these for about 8 years and they were originally professionally refinished by Hubcap Heaven in Penn Hills, PA. Curbage and other...
Hah. I bet that was it.
Looked to be Avus with Euro 5 spokes.
Looked clean.
If you are the new owner, enjoy.
Did you buy directly form Hotchkis? I think I bought mine from Summit Racing. They are such a heavy hitter that they may have had stock or work closely to drop ship with Hotchkis.
I used Bell P/N A300090100 which are pretty much flush in thickness with the end tanks.
You can actually go the next thicker size and 'stretch' the welds.
I think it's a fair price. Includes the adapter kit, clutchmasters clutch and Nubcake tune.
Additional hardware costs (and additional time) add up when it's also recommended to replace the...
Was Apikol able to give you any support?
As far as I can remember, the Wagner kits seem to be the most complete aftermarket ones out there. The fact that they supply new ducting is a good...
I've gone on record quoting $8k out the door for the conversion if they deliver the car to me and allow me to use used parts for the axles, prop shaft and transmission. The variable is the...
To the original question, how many C5 RS6s are left?
I'm exaggerating of course, but based on the amount of partout threads on AZ, you would think that there are none left on the road.
Same for...
It depends on your level of comfort with a few things, but you can use the radiator from the A6 4.2.
It involves blocking off the after-run pump and switched valve among other things.
Non-hot...