Search:

Type: Posts; User: AudiPilot

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. BLUF: 1) Is there specific VCDS re-coding...

    BLUF:
    1) Is there specific VCDS re-coding required to "code out" the factory radio nav after RNS-E installation?
    2) Do I need a different wiring bundle than the one I'm expecting to come from zawa...
  2. Many thanks for the very quick response from both...

    Many thanks for the very quick response from both of you! Yes, I think I'm missing that whole "duct." At some point the car was in a front end collision (well prior to my ownership)... it's...
  3. At some point in my car's life the piece that...

    At some point in my car's life the piece that holds the sensor apparently went missing... someone tried to do it right and still zip tie it to the front of the car (circled, but doesn't that piping...
  4. Replies
    7
    Views
    963

    Thanks for the info on your setup!

    Thanks for the info on your setup!
  5. The repair begins...

    Here we go... the windshield was original, so Iím pretty sure the left and right water deflectors (black trim) had never been removed. This allowed dust/dirt to accumulate, and then any time it got...
  6. Replies
    9
    Views
    709

    According to the listing, yes, but I submitted a...

    According to the listing, yes, but I submitted a request for pricing and it had to go through their U.S. distributor, who responded with pricing and build time (see picture)... Also I asked...
  7. Absolutely! I plan on asking the body shop for...

    Absolutely! I plan on asking the body shop for some in-process photos, so if they come through with that I'll post showing the repair.
  8. Replies
    6
    Views
    4,034

    Thread is a few years old but certainly no less...

    Thread is a few years old but certainly no less relevant... can anyone advise on the type of solder recommended? Is basic 60Sn/40Pb acceptable? I'm not an electrician so I'm coming at this cold, but...
  9. Can someone tell me the number of rivets (33) and...

    Can someone tell me the number of rivets (33) and fasteners (2A) that are used to join the bumper to the reinforcement bar? I can see three, but there could be more out of view... Bumper is coming...
  10. It seemed pretty easy... I don't make a habit of...

    It seemed pretty easy... I don't make a habit of just pulling on things until they just pop off, but the service manager at my trusted body shop was very confident as he pulled it away (carefully) at...
  11. Many thanks to all who replied as well! One of...

    Many thanks to all who replied as well! One of the aspects that made prospective ownership tenable was the vast repository of experience contained herein...
  12. Sage advice, and as a matter of fact, yes I do...

    Sage advice, and as a matter of fact, yes I do hear wind noise... see, they don't tell newbies what you can pull off (molding) and what you can't... Guess we found the source, thanks for the insight!...
  13. I’m seeing the primary possibilities: 1) Cracked...

    I’m seeing the primary possibilities:
    1) Cracked drain assembly (requires headliner removal? :doh:)
    2) Cracked roof weld (in the channel, body shop repair with epoxy)

    Would be grateful to hear...
  14. Thanks! I did check the forward sunroof drain,...

    Thanks! I did check the forward sunroof drain, and it seemed clear. Can it be cracked and leaking inside the tube that runs down the A-pillar?
  15. Wet Driver's Side A-Pillar... Help Wanted!

    After a search on the forum (via Google, not the integrated site search) I didn't see anything specific to this... Here are the facts:

    - I've owned the car a month and it's been kept out of the...
  16. Replies
    7
    Views
    963

    Can I ask what you went with? Iíve had Alpine in...

    Can I ask what you went with? Iíve had Alpine in previous vehicles, and their styling is subtle enough to me that it might not totally undo the OE ďpuristĒ goal. Curious though how well it drives the...
  17. Replies
    7
    Views
    2,054

    That's a huge help, knowing you went after the...

    That's a huge help, knowing you went after the fan and not the control module... Given you had the exact same symptoms, I'll go that route!
  18. Replies
    7
    Views
    2,054

    Long time since these posts, but did replacing...

    Long time since these posts, but did replacing the module (4B0959501E) happen to clear the code? I have soft codes (no CEL) 18393 (P1985) Radiator fan control unit 2 J671 malfunction, and 18308...
  19. Replies
    9
    Views
    709

    I'd commit to buy!

    I'd commit to buy!
  20. If it's a solid reproduction of what was pictured...

    If it's a solid reproduction of what was pictured earlier in the thread, I'd commit to purchase one!
  21. Unfortunately I don’t have any further info (eBay...

    Unfortunately I don’t have any further info (eBay or otherwise) related to a custom front splitter. Sorry!
  22. Ah well... they looked good! Thanks for the...

    Ah well... they looked good! Thanks for the feedback.
  23. Thanks for giving us closure! Any chance you...

    Thanks for giving us closure! Any chance you could share the manufacturer to see if they could still make a one-off?
  24. Many thanks for that explanation; makes perfect...

    Many thanks for that explanation; makes perfect sense! Based on your experience, would it be possible to reinstall the rivets with the front end assembled?
  25. RS6 front bumper mystery attachment hardware

    I'm fresh out of leads in figuring out the missing hardware pictured -- three "holes" with inserts that look like they should take some sort of fastening hardware, missing when I bought it (sorry for...
Results 1 to 25 of 59
Page 1 of 3 1 2 3