If all else fails try "Nubcake" , he sometimes can get hold of one spare TCU w/without chip and arrange.
Now he did not chime in, so far, but he will definetely do a grea job one or the other....
Type: Posts; User: eurovintage
If all else fails try "Nubcake" , he sometimes can get hold of one spare TCU w/without chip and arrange.
Now he did not chime in, so far, but he will definetely do a grea job one or the other....
Interesting to see the differences. Must be quite a different feel between the 2 to drive.
Looking at the difference of 600 lbs more is discouraging, as it shows that the auto industry is more...
MUggy, have You thought of cleaning the Cats ? Done it with other cars incl. my rs6.
Removing them needs some cutting, and than later rewelding, but no big deal.
I did soak them in a plastic tub...
We bypassed the ATF fluid completely using the new cooler.
The engine oil is running through the original cooler inf full.
Cheers,
Ivan
Any estimate on weight savings versus stock radiator ?
I have auto tranny, but we added a separate oil cooler for the transmission, and are using the stock shared cooler for engine oil only now....
Hi Muggy,\
Weight is the enemy, every pound conts, especially up front on oour cars.
You chould drink champagne, is lighter !
If You could put on the hardware which is saved too, and let me know...
Hi Muggy,
Do YOu havfe any estimate how much weight savings can be gained with removing the auxiliary coolers ?
Thanks,
Ivan
Remember every car is different, due to condition, tolerances etc.
Best is an individual type tune/tunes.
Nubcake did my programs, great flexability, very happy with them !
My 10 cents
Ivan
Very nice indeed,
any estimate in terms of weight savings vs original NA seats ?
Cheers
Ivan
Looking for a good Kit, or just individual hoses.
also for the auxiliary radiators.
Pacific NW or Canadian supplier preferred.
Looks like usual suspects (ECS etc. do not carry them).
Thanks
Ivan
Have Intake off, but having hard time sourcing
this little electric pump (ciculation after shut off for turbo cooling).
The new part # is 077121599A.
Most sources have to get them from Europe, 3...
Thanks Alex,
So we have finally taken off the Intake manifold,
Mice were gone, but nest was there.
Damage to vacuum pump, will replace aux. water pump just in case.
Philosophical question;...
Thanks Alex,
Probably keeps the Cats also cleaner,
as cold running is like the old fashioned 'Choke" enrichment via the ECU.
We just cleaned the Cats, so I will leave it in for now.
Thanks Dave
Lots of good info there
Did read that this is supposed to improve performance/fuel economy ?
Any negative effects ?
Hod does the computer react, any Codes and how to erase ?
We just have everything apart, would be a good...
Thanks,
they seem to be very close in spec.
The BERU # ... is on the body.
Brown wire in, brown colored body.
Both are still hookedup,
one has a minor wiring blemish near its body,
so sauter is...
Thanks,
Where is one available,
Canada or USA ?
Found Mouse nest under intake,
explains false air !
Cheers,
Ivan
Just wondering if anybody knows the function of this little brown
box ? There are two of them in the engine compartment,
one on each front on top of the cylinder banks.
It is somewhat hidden under...
Hi Alex,
Been very busy last Year, Enjoying my new Hip,
and raced in Mosport and Laguna at the Monterey Historics with the Healey.
My car is originally from Ontario.
The shop managed to install...
Just wondering how much labor is involved ?
For the part I got charged $ 1,500 Canadian Funds ?
Reasonable ?
Is there an Audi Repair Time Table available for our C5 Rs6's ?
Thanks
Ivan
Thanks, will have to check once I get the car, hopefully in 2 weeks.
Just wondering if anybody managed larger discs up front with stock 18" wheels, and
stock calipers, DSC ride height ?
A tuned Audi (or any high powered car) is more sensitive in the snow versus its untuned siblings.
Having several programs with one low power (low boost) will help.
Looking for a set but can not find the, only the K & N.
Just wondering if the air filters on the RS6 are the same size as for other Audis with the 4.2L V8 ?
Maybe S6 .... Anybody have a part # ?...
In Canada 15 Years; from date of manufacture. Not sure when the first ones were manufactured.
Or did they advise You that May would be the earliest in any case ? Keep in mind that Yo have to pay in...