Replacement Radiator

Howdy RS6'ers,

My main radiator sprung a leak. Does anyone have a spare they want to part with or is there a source for a replacement somewhere? I've tried a couple of searches, but most list A6/S6/RS6 comparable and not sure it truly fits the RS6. Anyone have a part number to reference?

I found this: https://www.partsgeek.com/gbproducts...SABEgLgm_D_BwE
but question whether it is what I need.

Appreciate any info you can pass along.

Thanks,
Scott

That sucks. I ran into a problem years ago sourcing a direct replacement radiator. All of the aftermarket options claim to fit the RS6 but lack the 3rd coolant port for the after run pump unique to this car.


Check out this thread for all the information you need.

https://www.rs6.com/showthread.php/33890-Radiator-leaking

Thanks for the reply and thread link.

Super cheap and they claim it fits, don't know if the picture is really for the right part, I doubt it.
https://www.amazon.com/Spectra-Premi...ype=automotive

Quote:

---

Originally Posted by hahnmgh63

Super cheap and they claim it fits, don't know if the picture is really for the right part, I doubt it.
https://www.amazon.com/Spectra-Premi...ype=automotive

---

Based on the picture, it's missing the third port on the drivers side. The challenge with "RS6 Fitment", is apparently some of the early production cars didn't have the afterrun-pump routed back to the radiator, so those cars would not need the third port. The fitment guides don't seem to differentiate between the early and late designs, so they say they fit the RS6, but most likely don't.

It would be interesting to try and verify if the early cars really were different, anyone with a low VIN care to check?

Quote:

---

Originally Posted by GreggPDX

Based on the picture, it's missing the third port on the drivers side. The challenge with "RS6 Fitment", is apparently some of the early production cars didn't have the afterrun-pump routed back to the radiator, so those cars would not need the third port. The fitment guides don't seem to differentiate between the early and late designs, so they say they fit the RS6, but most likely don't.

It would be interesting to try and verify if the early cars really were different, anyone with a low VIN care to check?

---

I think you will find the aftermarket ones will not have the third port for the after-run coolant pump. I looked at many pictures and none had it. You can search on my post. I went with a OEM one for about $1k - it was new - built in 2017.

Scott

Seems like someone smarter than me Could 3D print and adapter to add the port with maybe some hose modifications.