FS :: RS6 XM Radio control module

[nene]

Hi friends,

Now that I am sure to be happy with my RNS-E, I have an XM Radio control module that works with the Symphony II radio. I had to upgrade to a new control module specific for the RNS-E.

If anyone is interested, I'll gladly send it off to you for a small price of about $200US. Brand new it went for $450, and current brand new prices are around $350.
It does not come with the installation bracket. The bracket can be purchased from your local dealership separately for about $35. I can supply you with bracket part number to be easier to find it. This was on my car for a good part of 9 months or so, and worked flawlessly for trips up and down the Northeast USA.

The module looks identical to the following:
http://www.htms.org/img/rnse/fig014.jpg
http://www.htms.org/img/rnse/fig015.jpg


The bracket that requires to be purchased looks identical to the following:
http://www.htms.org/img/rnse/fig013.jpg

For a sample installation procedure, please look at steps 5 and 6 in my RNS-E write up (http://www.htms.org/rnse.html)!

If you feel $200 may be a bit high, please send me your best offer, and I will gladly consider it. Price does not include shipping, which is probably another $10 (shipping/insurance/packaging/etc)

Thank you.

[mmaturo]

and there is two available if you have more than one taker...I have my original one also as I upgraded too.

[nene]

I'm with him!
If anyone is looking to get the XM module, please feel free to PM either one of us.

[Aronis]

I think you should deliver it and install it.

LOL.

I have one, have had it for about 16 months. love it.....

somewhat replaced by IPOD though, but you can't beat a long drive with access to fox news LOL.

Nene, I want that NAV but don't have the spare cash at this time....some day.

Mike

[nene]

Thanks all for participating. My XM module is sold.

[BBGT2]

I thought the 'E' version is what was needed for the RNS-e setup? That is what I was told on the navplus forum.

Bajo:addict:

[nene]

Bajo,
The picture show is the 'E' version which only works with the RNS-E. That is only an example picture shown. The actual item sent to the seller is the correct one for the Symphony II, which is not an 'E' version.

[BBGT2]

Originally posted by nene
Bajo,
The picture show is the 'E' version which only works with the RNS-E. That is only an example picture shown. The actual item sent to the seller is the correct one for the Symphony II, which is not an 'E' version.

Okeedokee, thank you.
Bajo:addict:

[RS6Canuck]

Does anyone still have an 'XM Radio control module for a Symphony II radio' still available?