PDA

View Full Version : Killer Coupe (726hp BMW M coupe)



Duma
July 11th, 2005, 19:52
http://www.raceonlimit.com/attachment.php?attachmentid=3271http://www.raceonlimit.com/attachment.php?attachmentid=3272

http://www.raceonlimit.com/attachment.php?attachmentid=3273http://www.raceonlimit.com/attachment.php?attachmentid=3274

rks838
July 12th, 2005, 03:16
can't see anything...

Clio16V
July 17th, 2005, 14:56
I think this is the one:

http://www.activeautowerke.com/cars/TurboMZ3/images/driverfrontcorner_jpg.jpg

http://www.activeautowerke.com/cars/TurboMZ3/images/motor_jpg.jpg

http://www.activeautowerke.com/cars/TurboMZ3/images/upgradecaliper2_jpg.jpg

http://www.activeautowerke.com/cars/TurboMZ3/images/reartires_jpg.jpg

http://www.activeautowerke.com/cars/TurboMZ3/images/intake3_jpg.jpg

http://www.activeautowerke.com/cars/TurboMZ3/images/intake4_jpg.jpg

http://www.activeautowerke.com/cars/TurboMZ3/images/intercooler1_jpg.jpg

http://www.activeautowerke.com/cars/TurboMZ3/images/intake_jpg.jpg

http://www.activeautowerke.com/cars/TurboMZ3/images/hiddenalcoholtank_jpg.jpg

http://www.activeautowerke.com/cars/TurboMZ3/images/exhaust1_jpg.jpg

http://www.activeautowerke.com/cars/TurboMZ3/images/carondyno2_jpg.jpg

http://www.activeautowerke.com/cars/TurboMZ3/images/aaknob_jpg.jpg

http://www.activeautowerke.com/cars/TurboMZ3/images/aaknob2_jpg.jpg

http://www.activeautowerke.com/cars/TurboMZ3/images/alchtank1_jpg.jpg

http://www.activeautowerke.com/cars/TurboMZ3/images/wheels2_jpg.jpg

http://www.activeautowerke.com/cars/TurboMZ3/images/driversrear_jpg.jpg

Clio16V
July 17th, 2005, 14:58
Specs:

Specification:
0-60mph: 3.6 sec
0-100mph: under 7.4 sec (estimated with smoking tires)
1/4 mile: 11.6 sec / 131 mph
Horsepower: 726.00 BHP at flywheel @ 21 psi
Fuel: 93 octane (pump gasoline super unleaded)

Engine:

* 1999 S52 fully bulit engine. JE Pistons / Pauter rods
* AA Turbo spec camshafts

Turbo Kit:

* AA custom intercooler 1300 CFM with air deflector 12.9x3.5x20 core 2.5" in/out
* AA custom auxillary fan
* Garrett GT40R Turbocharger
* AA turbo manifold with external wastegate upgrade
* HKS GTII 50mm racing wastegate
* Greddy oil catchcan
* HKS racing bypass valve
* AA constant torque hoseclamps
* AA custom 4.0" intake plumbing to turbo
* K&N Air filter with low pick-up intake
* Kevlar thermal wrap on all turbo plumbing
* Intake manifold thermal wrapped
* AA custom software/dyno tuned

Additional Cooling:

* AA custom aluminum radiator
* AA custom water/alcohol injection system with (2)
accumulators
* AA custom water/alcohol reservoir with thermal wrap
* AA dual water/alcohol injector nozzles

Instruments:

* Stock instruments
* Custom boost gauge with chrome ring replaced clock
* Greddy Turbo timer
* Greddy electronic boost controller
* Lean/Rich mixture gauge
* Oil Temperature gauge

Fuel:

* Custom 14mm I.D. fuel hose (stock = 7.5mm)
* Custom 1000 HP fuel pump
* Custom hi-flow fuel filters
* AA custom dead-end fuel rail
* AA custom 550cc fuel injectors
* AA custom external fuel pressure regulator with liquid filled gauge

Ignition:

* AEM ignition module / iridium plugs



Traction Control:

* Racelogic



Exhaust:

* AA custom 3.0" exhaust with dual 3.0" resonators
* (4) 3.5" exhaust tips

Clutch:

* Sachs 4 puck metal race clutch
* AA GEN3 Aluminum 12.0 Lb Flywheel

Differential:

* AA Custom 40% lock up with 2.79:1 ratio



Shifter:

* AA Short Shifter Level 4 kit with AA Tuning Knob

Suspension:

* Eibacjh Race springs 550lbs front 700 lbs rear
* Ground Control adjustable camber/caster plates
* Adjustable Koni shocks
* Factory swaybars



Wheels/Tires:

* Kinesis K58
(F)18x8.5
(R)18x11
* Michelin Pilot Sport
(F) 235/40ZR18
(R) 315/30ZR18

Brakes:

Front-Brembo gas/slotted 355x32 on 2 piece hat with Brembo 4 piston caliper
Rear -Brembo gas/slotted on 2 piece hat with Brembo 4 piston calipers

Toto89
August 9th, 2005, 11:12
Only a BMW...:D Audi's have much cooler look:dance: :addict:

mr
August 9th, 2005, 15:57
mad piece of engineering!!!!!!

but ... for "normal" drivers - not controllable / undrivable!!!!!!!
AND -> i don't want to know how much the tuning of this car costed.
furthermore ... well don't think it will be as steady as the M Coupe is.

Well ... one project that impressed me much more was the tuning of an m5 (BLACKM5) which is completely documented on m5board.com.

rgds
mr

Toto89
August 9th, 2005, 18:59
Maybe I haven't seen it carefully but I didn't found how many ccm does it's engine has:vhmmm: