PDA

View Full Version : Fred's RS6 euro housings - possible issue?



nene
March 1st, 2005, 14:39
Hi folks,
I was trolling the AudiZine forums and noticed FredRS6 vehicle pix below:

http://www.courtot.com/fred/rs6/rs6front.jpg

Please look closely at the the euro housings he's put on his car.
Can you tell the difference between the passenger side and the driver's side?
You can clearly see an wide gap on the top right hand corner of the passenger side housing that is not visible on the driver's side.

FredRS6...can you confirm that the housing is correctly aligned?
Thanks. Just looking out for you my friend.

mr.zeke
March 1st, 2005, 15:08
my stock lights have the same issue

nene
March 1st, 2005, 15:13
Make sure it's well aligned at the very least. If you see that sort of difference, best case scenario is mis-aligned. Worst case scenario, it's broken.

J0X
March 1st, 2005, 19:39
Umm.. bumper reflection?

audirs6sport
March 1st, 2005, 19:53
alignment could be one thing, but i've seen some damaged housings before where they turn out like the pic shown above.

nene
March 1st, 2005, 20:18
Originally posted by J0X
Umm.. bumper reflection?

Doubtful. Best case scenario is that it needs alignment. But the way it looks, I'm thinking it's broken.