PDA

View Full Version : RS6 Euro Tail Housings



nene
September 1st, 2004, 07:30
I ordered the Euro RS6 tail housings from <a href="www.avalonmotorsports.com">Avalon Motorsports</a>, and finally put them in. They arrived sooner then I expected.

When I got them, I found that although the amber turn signal portion was gone, there was instead a yellow/green cylindrical object covering the white bulb. It's just like shown on picture below taken from an S4, but it was not clear. It was a yellow object. Well, I put my dremel tool to work, and after a good time working it, I removed it. The hole for the turn signal bulb is a bit wider now, but you can't tell from my pictures below.

I will order the Phillips Silvervisions since they look clear, but blink amber. I have a set for the Euro front housings, and now just need it for the rear.

S4 housing:
<img src="http://www.coe.neu.edu/~nelson/img/eurorear/fig1.jpg">


Pictures of my Euro tail housings; keep in mind that there is an amber bulb in there; in the second picture, the housing is not broken...just some weird reflection:
<img src="http://www.coe.neu.edu/~nelson/img/eurorear/fig2_lg.jpg">
<img src="http://www.coe.neu.edu/~nelson/img/eurorear/fig3_lg.jpg">
<img src="http://www.coe.neu.edu/~nelson/img/eurorear/fig4_lg.jpg">