WANTED: RS6 for test of MTM brake system

[tmtek]

Wanted: Audi RS6 for test of MTM brake upgrade, 8-piston Brembo calipers, 380x34mm slotted brake rotors, stainless steel lines and all required components. Brake kit may require 19" wheels. Person supplying test vehicle gets to keep the complete brake kit after testing. Possible addition of engine and/or transmission performance chip upgrades and/or rear brake system upgrade. Installation at TMTeK in Londonderry, NH. Testing at the Audi Nationals at BRI (Brainerd International Raceway) in Brainerd MN, Sep 11-14, 2004. Please inquire for more information. 800-898-6835. THANKS!

[rs6_newyork]

testing at a track event? will you be gifting the donor a new set of tires as well? I have 19" wheels, but the PS2s cost 300 bucks each.

[tmtek]

Everything is negotiable. We can look at some type of compensation for tire wear. Please give me a call to discuss if you are serious. Thanks! 800-898-6835 -glen

[7:53 RS6]

If you fly over my car and then home agin:D :D :D

Its :vgrumpy: to live in Sweden.

[audirs6sport]

im in california, would that be possible?

[rs6_newyork]

I was interested then I realized that Brainerd, made famous by Fargo, is 1400 miles away!!!, not much nearer NH also...

either I drive that, return, 2800 miles, or someone else does (no thanks!).

By the way are "big brake kits" such as MTM brembo or whatever thicker by even a few mm than the stock brakes?

[audirs6sport]

i am 3018.04 miles away!!! you got some type of solution for this TMTek?

[tmtek]

Rotors supplied with this MTM kit are 380mm x 34mm

[tmtek]

Transportation of the vehicle for installation of the bake system and/or for testing and return is possible depending on location and other logistical factors. Please call if interested! 800-898-6835 Thanks!