1sadavant
November 22nd, 2017, 16:29
All starting to slowly liquidate my brake inventory...over 30 Brembo calipers and 15 rotors...
Anyway have for sale the following for the Audi:
#1 NOS 2003 Audi RS6 Rear Driver Side Rotors 335x22mm x 2 $300 Shipped CONUS
New old stock 2003 Audi RS6 rear driver rotor. No longer available from the factory. Have two left sided rotors. Purchased 3 sets of the rears but they sent me 4 left and 2 right...I'm keeping the correct pairs and selling off the two extras. Frankly the issue was I attempted to order 3 pairs of the rears 3 left and 3 right, Audi dealership /Parts departments being as terrible as they are told me at the time of ordering that they were all in stock ready to go all they needed was a cc. Well 4 weeks later I get a call saying they arrived, this was apparently a special order and all sales were final, little did I know they ordered 4 left and 2 right this leaving me with only two pairs...I couldn’t Cancel the order or return them, thus I’m left with what I have... also found out apparently these are the only ones in the country from the any dealer. Otherwise I would keep the extras and source the right side.
Part number 4B3615601B
Non-Drilled
Directional
18326
18327
18328
#2 2009 Audi (https://www.ebay.com/sch/eBay-Motors/6000/i.html?_from=R40&_nkw=audi) R8 Brembo 8 Piston (https://www.ebay.com/sch/eBay-Motors/6000/i.html?_from=R40&_nkw=piston) Front Passenger Caliper $450 ShippedGood condition R8 Original Brembo 8 Piston Caliper. (28mm x 4, 32mm x 4)
Same 8 pot caliper found on Lamborghini Gallardo, C5 RS6, B7 RS4, R8, RS3 8V,RSQ3, RS5.
Also same as the Brembo GT 8 piston Caliper
Part number: 20.7675.02
The rear corner was a bit marred and looks like the black paint has been touched up in a few places.
The cross over tube and the bleeder valves are in good condition and have been pressured tested without leaks. All threads are clean and no signs of stripping.
Included in the sale are the pad stabilizers and brand new line which can be mounted to any B5/B6/B7/C5/C6/ Audi using an M10 male/female connection.
*the R8 is a radial mounted caliper, the RS4/RS5/RS6 are all axial mount so you would need to source a bracket or have one made.
2 front mounts for the aforementioned models can be sourced for $670 shipped including the caliper.
18329
18330
18331
Anyway have for sale the following for the Audi:
#1 NOS 2003 Audi RS6 Rear Driver Side Rotors 335x22mm x 2 $300 Shipped CONUS
New old stock 2003 Audi RS6 rear driver rotor. No longer available from the factory. Have two left sided rotors. Purchased 3 sets of the rears but they sent me 4 left and 2 right...I'm keeping the correct pairs and selling off the two extras. Frankly the issue was I attempted to order 3 pairs of the rears 3 left and 3 right, Audi dealership /Parts departments being as terrible as they are told me at the time of ordering that they were all in stock ready to go all they needed was a cc. Well 4 weeks later I get a call saying they arrived, this was apparently a special order and all sales were final, little did I know they ordered 4 left and 2 right this leaving me with only two pairs...I couldn’t Cancel the order or return them, thus I’m left with what I have... also found out apparently these are the only ones in the country from the any dealer. Otherwise I would keep the extras and source the right side.
Part number 4B3615601B
Non-Drilled
Directional
18326
18327
18328
#2 2009 Audi (https://www.ebay.com/sch/eBay-Motors/6000/i.html?_from=R40&_nkw=audi) R8 Brembo 8 Piston (https://www.ebay.com/sch/eBay-Motors/6000/i.html?_from=R40&_nkw=piston) Front Passenger Caliper $450 ShippedGood condition R8 Original Brembo 8 Piston Caliper. (28mm x 4, 32mm x 4)
Same 8 pot caliper found on Lamborghini Gallardo, C5 RS6, B7 RS4, R8, RS3 8V,RSQ3, RS5.
Also same as the Brembo GT 8 piston Caliper
Part number: 20.7675.02
The rear corner was a bit marred and looks like the black paint has been touched up in a few places.
The cross over tube and the bleeder valves are in good condition and have been pressured tested without leaks. All threads are clean and no signs of stripping.
Included in the sale are the pad stabilizers and brand new line which can be mounted to any B5/B6/B7/C5/C6/ Audi using an M10 male/female connection.
*the R8 is a radial mounted caliper, the RS4/RS5/RS6 are all axial mount so you would need to source a bracket or have one made.
2 front mounts for the aforementioned models can be sourced for $670 shipped including the caliper.
18329
18330
18331