6MT swap guys. Anyone run a TTV flywheel.

[Wide-66]

Short story and I have pictures. Just finished the swap on my RS6 and it will not fire up. It has a cam correlation code. The timing is dead on. I believe and was apprehensive before installing the flywheel that the crank trigger was milled in at the wrong orientation. TTV claims it is fine 2 respected tuners say there is no way it will run with the design of the flywheel.

I just wanted to see if anyone out there has run one. If so what is the orientation of the blank spot in the trigger at TDC to the CPS.

I have another flywheel on the way from our friend Steven Ken. I just want to hammer on TTV if it is truly wrong for wasting so much time and for such poor customer service.

[mrdave]

Any pictures of the TTV flywheel?

Here's Steve's to compare: http://www.rs6.com/showthread.php/21330-FOR-SALE-(finally)-6-Speed-01E-Adapter-Kit-for-the-C5-RS6?p=253512&viewfull=1#post253512

[Wide-66]

17730

This is the TTV. The motor is locked w the crank pin at tdc in the photo. Notice the position of the crank trigger blank is at about 1 o clock. It should be in my opinion at the 10 o clock position. Im no trigger expert but all the flywheels ive put on the blank lines up with the CPS at TDC.

I have steves flywheel on its way to me. From the pictures I have see it looks like it will land in that 10 o clock area.

[Wide-66]

17731

Heres the ride as I got it. I have done quite a bit on it since then.

[scottmandu]

I has the same issue I think..

17732

[Wide-66]

Ship that paperweight back its junk unless you run an external trigger. I finally spoke with them today. It must of been a sales guy, not technically knowledgable inthe least. Worse is they knew that they had bad flywheels made having trouble with the impulse signals. I brought up my concerns prior to install but never doing the swap i went ahead with the swap at their advice. All along they knew of the bad flywheel issues. Very decietful and a very bad business practice in my opinion. You better believe ill be posting this on all the forums. If I can save one person the trouble I went through it will be time well spent on my part.