bakes
September 23rd, 2016, 03:08
Looking to sell my RS6.
Just rolled over 100k miles. Daytona Grey with black interior.
Overall in excellent condition. I purchased this vehicle from a fellow member (headshot) approx. 5 years ago. Car is currently located 1 hour outside of Toronto but I could have this car shipped back to the US.
Modifications:
Most of the work was done by Headshot.
- KW 3 suspension -fully tunable without a suspension drop!
- Hotchkis Sway bars
- LLumar tint
- Custom hood (30' temp drop) and lip spoilers / rear diffuser
- Phaeton brake mod
- Factory Euro RS6 Recaro's Black / White striping
- CF TRIM
- NEw Vacuum hoses
- Dahlback dump valves
- Wagner intercooler kit
- Venair sport hoses and t-bolt clamps
- TCU MTM chipped
- ECU chipped out at Stratmosphere Stage 3 tune.
Since I've owned the car I've done the following:
- Aftermarket Forgestar gunmetal 19" wheels. Brand new 265/35/19 Michelin PSS as of last month. Run with 6mm spacer
- removed rear mufflers and run straight out to dual tips on each side. Factory mufflers will be provided with car.
- Torque converter and transmission were rebuilt in fall of 2014 (full receipt avail to show work done).
- Just replaced the front rotors and pad along with a rebuild of the right front caliper (a piston was sticking).
- Factory 18" wheels have winter tires on them (will get the exact tire model and update)
- Timing belt / water pump was done at 75k miles.
Car has been great to me but it is just time to move on. Looking for $22K obo.
I'll be taking photo's and updating this post this weekend.
Here is headshot's post to show pictures then and a few close up of the current wheels.
http://www.audizine.com/forum/showthread.php/437334-Mint-RS6-for-sale
17657176581765917660
Just rolled over 100k miles. Daytona Grey with black interior.
Overall in excellent condition. I purchased this vehicle from a fellow member (headshot) approx. 5 years ago. Car is currently located 1 hour outside of Toronto but I could have this car shipped back to the US.
Modifications:
Most of the work was done by Headshot.
- KW 3 suspension -fully tunable without a suspension drop!
- Hotchkis Sway bars
- LLumar tint
- Custom hood (30' temp drop) and lip spoilers / rear diffuser
- Phaeton brake mod
- Factory Euro RS6 Recaro's Black / White striping
- CF TRIM
- NEw Vacuum hoses
- Dahlback dump valves
- Wagner intercooler kit
- Venair sport hoses and t-bolt clamps
- TCU MTM chipped
- ECU chipped out at Stratmosphere Stage 3 tune.
Since I've owned the car I've done the following:
- Aftermarket Forgestar gunmetal 19" wheels. Brand new 265/35/19 Michelin PSS as of last month. Run with 6mm spacer
- removed rear mufflers and run straight out to dual tips on each side. Factory mufflers will be provided with car.
- Torque converter and transmission were rebuilt in fall of 2014 (full receipt avail to show work done).
- Just replaced the front rotors and pad along with a rebuild of the right front caliper (a piston was sticking).
- Factory 18" wheels have winter tires on them (will get the exact tire model and update)
- Timing belt / water pump was done at 75k miles.
Car has been great to me but it is just time to move on. Looking for $22K obo.
I'll be taking photo's and updating this post this weekend.
Here is headshot's post to show pictures then and a few close up of the current wheels.
http://www.audizine.com/forum/showthread.php/437334-Mint-RS6-for-sale
17657176581765917660