PDA

View Full Version : New look



mgmarsh39
September 17th, 2016, 21:40
Picked up bakes Morr VS8.2s and installed H&R coilovers. I still need to put a few more miles on them before I do the final drop and alignment.


http://i.imgur.com/fHunouz.jpg

http://i.imgur.com/iiwSXfS.jpg

http://i.imgur.com/J2FB8Et.jpg

Aronis
September 17th, 2016, 22:09
looks brand new! you have a time machine???

mgmarsh39
September 17th, 2016, 23:36
Haha thanks Aronis! Still have some interior bits to replace but she's coming along. Less of a time machine and more of a high limit credit card ;).

Aronis
September 18th, 2016, 00:27
I was considering repainting my car (due to some rust on the doors with paint lifting) but the mechanicals are killing me......so no paint....

Mike

mgmarsh39
September 18th, 2016, 01:36
Just keep driving it, till the wheels fall off!

hahnmgh63
September 18th, 2016, 04:11
I wouldn't drop it anymore, maybe even raise the rear 1/8~1/4". Need to clear corner the headlights. Looks good.

DHall1
September 18th, 2016, 05:44
That is the problem. The wheels are falling off

jk

lol



Just keep driving it, till the wheels fall off!

ttboost
September 18th, 2016, 12:08
Nice. I don't do red, but that does look minty. And definitely bring the rear up 1/2", then we'll re-evaluate....

mgmarsh39
September 18th, 2016, 13:57
The suspension is still settling, so gonna give it a few more miles. It was definitely higher when I left the shop. I agree though, so will adjust in a couple days and shoot another pic.

Thanks all!

lswing
September 18th, 2016, 16:17
Looking good! Now please get those front windows a matching tint!!!

mgmarsh39
September 18th, 2016, 19:42
one of these days... :)

bakes
September 19th, 2016, 02:16
Looks great! I liked them on my car but having since put the gunmetal forgestar's back on I'm glad they found a new happy home!!

mgmarsh39
September 19th, 2016, 13:56
Thanks again bakes for the easy transaction!

The nose has settled a bit more, because I am noticing a lot more dips in the road lol.

mgmarsh39
September 20th, 2016, 23:16
Will be taking it back to the shop in a couple days, I've developed a really bad rattle in the rear. Front is squeaking over bumps too...

Bigglezworth
September 20th, 2016, 23:36
Front is squeaking over bumps too...Both of my cars here 'squeaked' after having theh struts swapped out. That was because I put in new rubber mounts. It went away after a couple of months in my instance.

mgmarsh39
September 21st, 2016, 01:24
Makes sense. Really need to figure out this rattle in the rear, starting to get worse.

Bigglezworth
September 21st, 2016, 01:49
Makes sense. Really need to figure out this rattle in the rear, starting to get worse.Double check all fasteners. Has been a loose sway bar bolt for a couple of members over the years, Not all that much taken apart to swap out the rear struts. In fact, aside from the two bolts that hold theh top of the strut to the chassis, it only requires removal of the bottom spindle bolt (used to adjust camber), the bolt that fastens the strut to the control arm. and loosening of a couple more.

17648
17649

mgmarsh39
September 29th, 2016, 03:24
The rattle was apparently the upper strut mount. Was only on the right rear, so luckily Mark's car had brand new ones installed before it was totaled, so swapped it and presto. No noise so far... (Crosses fingers)

The front on the other hand is still squeaky. Sounds almost like a bird chirping. Going to give it some more time though... Could be worn bushings with the added stress of being lowered. I'll post up a pic tomorrow of the final adjustment. Raised the rear up a tad, so it looks a lot better now.

Met another member at the shop today! Small world :).

kvicen
September 29th, 2016, 06:06
The rattle was apparently the upper strut mount. Was only on the right rear, so luckily Mark's car had brand new ones installed before it was totaled, so swapped it and presto. No noise so far... (Crosses fingers)

The front on the other hand is still squeaky. Sounds almost like a bird chirping. Going to give it some more time though... Could be worn bushings with the added stress of being lowered. I'll post up a pic tomorrow of the final adjustment. Raised the rear up a tad, so it looks a lot better now.

Met another member at the shop today! Small world :).


Mark, it was nice meeting you today. It was a surprise seeing another RS6 at the shop. MaxRS6 is the only other RS6 i've seen there besides mine. I will pull mine out of the garage this weekend. Maybe we can meet up for a drive.

mgmarsh39
September 30th, 2016, 02:25
Likewise! Shoot me a PM next time you're free. I've still got the annoying squeak on my front coilover, so I might be back at the shop next week lol...

mgmarsh39
October 3rd, 2016, 01:14
15% tint all around, raised the rear, and she got a good polish!

http://i.imgur.com/jfiEcx2.jpg

http://i.imgur.com/Q7v6rS3.jpg

bakes
October 3rd, 2016, 14:14
Looks great!!!