View Full Version : c5 rs6 rear rotors and calipers on a c5 s6
jordee
April 3rd, 2016, 00:35
need assistance on carriers for this rear brake conversion, anyone got any advice.
lswing
April 3rd, 2016, 01:28
No...but I'd start with providing some actual info on what you're doing and need help with. Sure you will get some feedback.
jordee
April 3rd, 2016, 11:35
no...but i'd start with providing some actual info on what you're doing and need help with. Sure you will get some feedback.
i'm looking at the possibility of running c5 rs6 rear rotors and calipers on a c5 s6 avant, the only problem is that the rs6 carriers don't line up. Any suggestions on what carriers may or should work?
SteveKen
April 4th, 2016, 14:45
The RS6 steel ones have to be used along with the tie rods from the RS6 or allroad.
canyon
April 4th, 2016, 22:56
The RS6 steel ones have to be used along with the tie rods from the RS6 or allroad.
This. You must use the steel rear hub carriers, wheel bearings, hubs, toe links, and brake lines from the RS6.