Audi RS6 BCY engine parts

[Norbitron]

Hello!

I bought a complete BCY engine to my C4/S6 but it is to difficult to put into the car so rather i will build up by an original 4.2 C4/S6 engine This is why i would like to sell all parts of the RS6 engine.
Intercoolers
Turbos
Exhaust manifolds
Intake manifolds
Heads
Block
Engine harness+ECU
Carbon engine cover and airbox
Throttle body
etc etc.....
If you are interesting for something just write me.

Cheers
Norbi

[BigD2500HD]

throttle body price?
also, since you have no other posts or activity on this site... do you have any references or at the very least pictures of all the parts?

[Other_Erik]

Interested in the EGT Sensors and the entire airbox including all its mounting hardware. Agreed with BigD, references and/or pics a must

[Norbitron]

The throttle body 200EUR + shipping.
I don't have RS6 this is why i haven't written here. Recommended this page by my friend to try to sell my RS6 parts here. I am on audisrs.com and s2forum with this nickname and on ebay with norbi.hu2014 name.


http://gallery.myff.org/gallery/1958705/DSC_0014.jpg (http://gallery.myff.org/gallery/1958705/DSC_0014.jpg)
http://gallery.myff.org/gallery/1958707/DSC_0015.jpg (http://gallery.myff.org/gallery/1958707/DSC_0015.jpg)
http://gallery.myff.org/gallery/1958709/DSC_0016.jpg (http://gallery.myff.org/gallery/1958709/DSC_0016.jpg)
http://gallery.myff.org/gallery/1958710/DSC_0017.jpg (http://gallery.myff.org/gallery/1958710/DSC_0017.jpg)
http://gallery.myff.org/gallery/1958711/DSC_0018.jpg (http://gallery.myff.org/gallery/1958711/DSC_0018.jpg)
http://gallery.myff.org/gallery/1958712/DSC_0019.jpg (http://gallery.myff.org/gallery/1958712/DSC_0019.jpg)
http://gallery.myff.org/gallery/1958714/DSC_0001.jpg (http://gallery.myff.org/gallery/1958714/DSC_0001.jpg)
http://gallery.myff.org/gallery/1958715/DSC_0011.jpg (http://gallery.myff.org/gallery/1958715/DSC_0011.jpg)
http://gallery.myff.org/gallery/1958716/DSC_0012.jpg (http://gallery.myff.org/gallery/1958716/DSC_0012.jpg)
http://gallery.myff.org/gallery/1958717/DSC_0013.jpg (http://gallery.myff.org/gallery/1958717/DSC_0013.jpg)

[Norbitron]

Block+heads: 2000EUR
ECU+loom:400EUR
2xMAF: 200EUR
Intake manifold: 100EUR
Intake Y pipe: 120EUR
Throttle body: 200EUR
Intercoolers: 250EUR/pair
Exhaust manifolds: 300EUR/pair
Turbos: 850EUR/pair
Fuel rail with sonic cleaned injectors: 300EUR
Ignition coils:100EUR/8pcs
Carbon airbox: 100EUR

[Norbitron]

EGTs were sold.

[BigD2500HD]

I appreciate you're quick response.
I'm going to pass at that price and shipping from Europe. Thanks.

[Other_Erik]

I appreciate you're quick response.
I'm going to pass at that price and shipping from Europe. Thanks.

Doubling on that. Just FYI here in the US we can get new in box K04's for ~400USD each, so 850Euro for the pair is ~10% more for used parts.

I take it from pics there was an engine fire? Did the front piece of the carbon airbox / its mounting components survive unscathed?

O_E

[Norbitron]

Yes if you buy aftermarket China turbo you can get for 400USD.... These turbos are stock. But if you can buy OEM K04's for 400 please let me know where :)
There wasn't engine fire. This is just oil leak under the valve covers. The engine came from a broken car.

Norbi

[BigD2500HD]

it doesn't look like a fire to me.... looks like that motor has been sitting outdoors in bad weather allowing for flash oxidization of all the aluminum bits and surface corrosion of all the steel bits. That motor and the turbos are in pretty poor condition.

Just for a reference point, I am by profession, an inspector/examiner of Steels and special alloys.... i specialize in Flaw detection, corrosion inspection and elemental makeup verification of allows. I just figure that would matter in my "opinion" of their condition, as i have 10 years of professional experience on the matter.