Can motor mount solenoid cause limp mode?

[UrS6]

I only have one code--motor mount solenoid--but my car keeps going into limp mode. It seems to be preceded by a lag and then a "buck" when accelerating hard. Like it's dragging a heavy weight that then breaks free and then it pulls hard. But then it will go into limp mode where it feels like it only has 180 hp until I restart it. There are no other codes but I noticed VCDS is only registering 13.3 volts while driving.

[lswing]

Never did for me. Log 3, 31, 115 and see what timing and boost are doing? Mount should not cause that lag. Air intake leak preventing boost build up, then over compensation maybe.

[DHall1]

Reset

Log 3 31 115 in turbo mode 2500 to redline in 2nd or 3rd

Report

[ttboost]

Nope. I had a motor mount code the whole time I had my car, until I did the manual swap. Did the non sensored mounts then. Sounds like you have a MAF leak. Check your airbox and were they attach to the MAF's.

[UrS6]

Reset

Log 3 31 115 in turbo mode 2500 to redline in 2nd or 3rd

Report
What's the best way for me to display my logs here?