Wrecked RS6 20 min. away, anyone need me to check on parts?

[hahnmgh63]

Looks like a pretty good slam on the left side. I'll try to find out some details on mileage too.

16539

[kruat]

Wow what happened?

I could use a clean unscratched hvac controls. Although I doubt they exist in used rs6s anymore. Drivers and passengers window switch trims as well, if it has the ivory interior.

[hahnmgh63]

Looks like Black interior.

[lswing]

Black plastic power steering reservoir cover. Carbon front engine cover with push clips. Full armrest. Black plastic cover by sun visor unclip point drivers side, just a small little cover/piece.

Thanks!

[s8prtotype]

I need the carbon trim piece above the glove box if it has no cracks :)

[Fastguy]

The two plastic inlet tubes up front going to air filter. All carbon trim if it is carbon. Actually in Portland now. Will be back in Seattle for a few hours on sat I think

[Other_Erik]

If it's getting parted out, I could use the EGT's

Thanks
O_E

[Dmb408]

Trans is listed on B&R's website for a pretty fair price, sure you could negotiate it down a bit too. I emailed them about belly pan - none of you scoundrels steal it from me.

[DHall1]

can anyone imagine the junkyard rats attempting to remove an rs6 transmission

[s8prtotype]

Axles will get sawzalled, wires will be ripped...lol the horror

[hahnmgh63]

Wood trim. I'm running by to take a look on my way to work.
http://seattle.craigslist.org/tac/ptd/5111133856.html

[Turbowned]

Wonder how much they'd take for the RNS-E

[Bigglezworth]

I need a replacement ABS Sensor, but highly doubt a wrecker would sell just the sensor vs. wanting to sell a complete ABS module.

[k2switch23]

hey fellows, just to let you know that car is down to shell, everything is gone.

[lswing]

hey fellows, just to let you know that car is down to shell, everything is gone.

Was that your source of parts? Just wondering, thanks for the heads up.

[k2switch23]

Was that your source of parts? Just wondering, thanks for the heads up.


I pulled few parts of it but I have my own full car that I am still parting

[hahnmgh63]

Yea, I looked at it yesterday morning. The pics they posted were very misleading (old pics). I took some pics if anyone wants to take a look but the front end is completely gone, engine sold, they do have the tranny. I was kind of pissed when I saw it compared to the pics. Has a Hotchkis rear swaybar but without pulling it and really checking it would be hard to say if it is bent or not. Here's a few pics.16543165441654516546
Lou, the P.S. cover is there but with about a 2.5" crack in it, sorry.

[hahnmgh63]

Speaking of Carbon Fiber trim, just saw this on Quattroworld.
http://forums.quattroworld.com/classifieds-parts/msgs/43154.phtml

[lswing]

Wow, she's been picked over, thanks a bunch Marc. Hey, now that I think of it, if you're bored and want to go back, if the rear plastic plate surround and lights are perfect and can be separated from the trunk I would be up for that if around $50? I've got a slight crack/blemish in one part of the plastic. Cheers!

Bit off topic, but does anyone know how to locate the front plate holder, the original one that attaches really clean to the bumper? Never thought I would want it, but just saw some pics of a very clean one, they look nice!

[s8prtotype]

I would LOVE any kind of filler plate for the front bumper like our B5 S4 has :(

Also, the link to the carbon you posted it's also cracked.... need a good stock one above the glove box. it's the only issue with my interior :(

[RKturbo]

Would be nice to get a passenger side air inlet duct for less than 236$. :(

[DHall1]

did anybody grab the vin number

[lswing]

I would LOVE any kind of filler plate for the front bumper like our B5 S4 has :(

Also, the link to the carbon you posted it's also cracked.... need a good stock one above the glove box. it's the only issue with my interior :(

Just order one from O Carbon.

I have seen the plate holder with designed back to snug up to the Euro plate space.

[repda503]

arm rest cover?

[lswing]

arm rest cover?

I asked first:) But don't really need it, just an extra.

Search for some threads on here about cheap ways to replace, using existing leather and $20 part, something like that. Or fake leather ones seem ok. Use the "site:rs6.com" term added to your Google search.

[ben916]

did anybody grab the vin number

That was my first thought...

Hope it isn't 905355...